What Have You Done To Your 3rd Gen Today?

I removed the Clazzio seat covers from my truck. They were in there for about 4 years.
The driver's side seat bottom started to show cracks last year so I contacted Clazzio about repairing or replacing just that one.
They requested pictures of the seat and after I sent the pics, I never heard anything back.
After that, I won't order from them again.
On the bright side, the original seats still look almost new. So in a way, the covers did their job.

 

Anyone know of a glove box light mod out there? I searched an old thread, about a year old, with nothing new. My '04 had a low output light that came on with the headlights, similar to the light where the wireless phone charger is. Not the coolest mod, just annoying there's no light there...

 

Bought the required adapter, breather, and hose to extend my rear diff breather, but I don't wanna drill any holes in my truck for this mod if I can avoid it. I don't plan on doing any major water crossings anyway, so can I just zip-strip the breather end to some higher point under the bed rather than doing the usual taillight/storage compartment end point?

 

Zip tie it to the back of the gas filer neck, follow the fuel line.

 

Excellent, will do. Was hoping it was that simple, thank you!

 

Why not?

 

I can see his pic.

Here it is again…

 

This video takes awhile but it gets there eventually
https://youtu.be/h-HU0B-iWqU

 

Thx, I see it now in your post. I'll look into it.

 

are you using an older bag style mobile phone?
the pic is large size
but no need for a remote start, i am still able to start the truck the old fashioned way
!!!!are you assuming the type of my transmission!!!!

 

I like this. I just don’t like having to drill into the bumper. But I hate how my license plate bracket sticks out, leaving a gap for a fairlead I don’t have.

 

those are mpg tires

 

I did my own by tapping into the illumination circuit to power a single LED. If interested I could build the wire harness for you.

 

I've only seen two others for sale in my area and I'll sell mine just a tad lower with front cam bracket included.

 

I have a hood switch that came with the remote start. But it’s backwards. Open contact when open closed when closed

 

It switches automatically wether you have a switch or not. I have an aftermarket head unit and iDatalink maestro to turn on the front and rear cam. Works the same.

 

That’s exactly the position I was in. The SSO tilting license plate bracket I bought sticks out at least 2”, so this looked much sleeker and was what I was aiming for.

 

Debating whether I want a dash cam or not.

 

Always better to have it before you need it.

 

I feel the same way about my side arm.