1st Gen Lunchtable Thread - General Discussion

EVO saw for the win



Cut down 40' of square tubing into 12x 35" long pieces for the shelf frame



And the layout

 

I picked it up for 5500 bucks with a title and everything

8 like new g load (14 ply) tires

...It's texas, so no rust

Dexter (14k axles?) Not too sure

I've pried the dust shields back on the brakes and the shoes have at least 1/3 inch of shoe left

Needs all new lights and wiring I finished the deck today... didn't get pics

Granted it needs some work I still think it was a killer deal

Going to get the ass supported by jack stands than lift the front till the tires are in the air and get some new valve stems since 2 of them were leaking. May as well replace em all

 

Uhh, what?

 

so many things wrong with that!

 

Super family fun time

 

noticed a spot where the water was dripping behind my new gutters. They installed the drip edge over the bottom layer of shingles which is bad BUT that spot has apparently leaked for a long time. Siiiick

Tempted to dump a bunch of roofing tar on the whole area til I get whole roof replaced

 

Uhhh....come again?

 

You should treat yourself to it, Family car at an affordable price

 

Another job to add to the LT Home Renovation Meet

 

The mileage is 4500, I feel like they mixed up the price and the milage

 

This frame setup I'm making is going to be a bolt together assembly so I'll need to cut a bunch of tabs, drill holes in them and weld them to angle iron.

Thru holes drilled into the square tubing for bolts to run through.

 

I wonder if thats the roofing equivalent to bringing a faded rattle can bed liner job to a auto body shop

 

Sounds like a great job for the 4214. Found myself adding and removing one from my cart over the last week (especially after seeing @Pablo8 get one in the shop/tools thread). Told myself that I wasn't going to get any new tools before I move to Reno, but you keep posting and I have the urge to get a 4214T and an evo...

 

They're all on the road because yesterday was the veteran day parade here

Unless you wanna pay to put it in a box and I'll PayPal you right now

 

Howdy old neighbor

 

4 angle pieces will run 34" long, with holes drilled with 4 3/4" spacing.

2 angle pieces will run 22" long, with holes drilled with 4 1/2" spacing.

Haven't measured the other runs yet.

Holes will be for mounting a laminate top, with self tapping screws ran underneath through to the laminate.

 

Oh she gone

 

When I was living outta my van there's over a solid year I was parking for sleep from Enumclaw to Yakima across 410 and connecting forest service roads.


Don't know when you left but if you ever saw an early 90s white chevy astro van, early 90s white ford econoline, 69 poop brown econoline, or flat black rattle can 64 econoline parked in a weird spot.. that was me