What Have You Done To Your 3rd Gen Today?

Didn't know that was an option

 

Good call

 

It's an additional item you can purchase. Allows you to control them when doors aren't open.

 

Tacoma Puddle Switch Kit – MESO CUSTOMS LLC

 

I’ll pass on the puddle lights. I wear boots mostly anyways. Besides there is no way l’m messing with the A pillar again. I did the grab handle mod what a pain that was.

 

You can tap them into the cargo light wiring (no fade but no biggie). That's what I did in the Tundra. WAY EASIER and on a switch for only $60 for the VLED PODS (Edit) $80 now but I bought them last year when they were $60

 

Last time I had my a-pillar apart. I snapped the bottom bolt on that whore of a handle. Still haven’t gotten it sort again to put a new bolt in and I grab that handle everyday.

 

Installed Bobs homelink mirror, i hate using the little clicker. Still need to go calibrate the compass.

 

Love mineeee. Calibrated itself after like 3 turns.

 

Cant wait to do this.

 

How'd it go? I bought one and the gorilla's at the dealership overtightened the filter housing so I couldn't unscrew the filter.

 

Was told by the service department the engine has a defective rod bearing. Been in the shop for 16 days they say it should be ready to roll the end of next week.

 

ooh nice, having a compass on the mirror makes me feel like i'm back in my chevy, without the agony of the door that comes off its welds and the worlds largest radio seek and tune buttons

 

Picked up my front bumper and installed it. I'm going to make some reinforcing welds in a few spots this weekend.

 

good luck took me two days and a couple band aids to do mine, those doors can get sharp on the inside.

 

I ate my lunch off those buttons some days

 

Is this a plug & play situation?

 

Does anyone know if the TPMS sensors on my 22 Tacoma sr5, will be compatible with the TRD rims? Simple switch over or will I need different ones or reprogramming? (part #

$279 PT946-35200-02 w/Center Cap

PT946-35200-02 for the TRD wheels)

 

They should be fine if your SR5 Wheels are Alloy. I switched mine from my OEM Off-Road Alloy Wheels to those same TRD wheels and all is good.

 

Turn one of the L into a D