Getting cam position codes

I've gotten codes for cam position retarded and advanced. I was gonna replace vvt solenoid to try an fix the codes. But not sure if the oil control valve is the same thing as cam position sensor?

 

What code(s) are you getting?
If it's P0011, 12,16,18, 21, or 22 it's probably the oil control valve for that bank.
If it's P0340, 342, 343, 345, 347, or 348 it's more likely to be a cam sensor or reluctor problem.
https://www.tacomaworld.com/threads/1gr-fe-bank-1-vvti-issues-p0011-p0012-p0016.770671/

 

The OCV and Cam Sensor (VVT sensor) are 2 different things.

 

What I was meaning I got a new cam position sensor, was going to get vvt and ocv but couldn't find ocv on rock auto. Vvt had the option with or without. Truck has 280000 miles so it's not gonna hurt to replace all while I'm in there

 

Codes are p0011 an p0012.

 

I wouldn't bother replacing the cam (VVT) sensors until they fail and only use OEM.

Rock Auto has the solenoids they are listed under Engien > VVT Solenoid/Actuator.
https://www.rockauto.com/en/catalog...+valve+timing+(vvt)+solenoid+/+actuator,12910

Cam (VVT) sensors are listed under Ignition > Camshaft Position Sensor.
https://www.rockauto.com/en/catalog...434686,ignition,camshaft+position+sensor,7192

Yea having both over advanced and over retarded codes at the same time is almost always the oil control valve sticking.
11 and 12 are for bank 1 which is passenger side.