RSI Smart Cap

Thats perfect, thank you! Very cool heater...

 

Any pics of the Prinsu cap rack without anything mounted on it? Was it direct bolt on and fit or did you need any additional parts/modifications to fit the RSI rails/nuts?

 

No pics of nothing mounted unfortunately. The only thing I did was drill out the Prinsu mounts to accept the RSI M8 instead of the Prinsu M6 default. Took me maybe 10-20 minutes to get it drilled out and mounted.

 

Don't know how long it took to convince the better half, but you'll be waiting a lot longer for the Black Friday deal. Been lurking this thread since the pre-sale and no discounts since then.

Waiting on the new latches to come standard. After that, I'll have no excuse.

 

Will those ship with the caps? Or do we need to place an order?

 

Completely agree, these will continue to increase in price, wether it's due to labor and materials, and/or freight cost. Best deal around seems to be from @Mike's Custom Toys since they offer free installation and no tax if you can drive there. When I messaged SmartCap about six months ago, their responses sounded like they aren't able to keep up with demand so there isn't a need to do any promotions or sales. I was going to wait for new latches as well, but I was able to get one in stock from Mike's a couple weeks ago.

 

When I asked @Mike's Custom Toys they said there would be no BF discounts. If you order now, the cap will come with updated latches.

 

You will need to place an order. Some members bought covers at the same time as the cap and we ran out.

https://mikescustomtoys.com/products/latch-cover

 

Correct "NO BLACK FRIDAY SALE" The Tacoma caps that will arrive in December should come with the new latches. However I do have one Adventure left that was made in SA available.

 

Can anyone tell me a measurement of the rear window? Want to have a decal made for our business but haven’t received the cap just yet

 

Potentially dumb question, will these covers work with the updated latches? Trying to decide if I need these or am I better off just waiting for updated latches to become available.

 

See above quote.

 

I see that, but it’s not telling me if the updated latches are compatible with the current latch covers. I assume they are but maybe the new latches already come with latch covers.

 

When do we get to catch a glimpse of those latches? Has that NDA expired yet?

 

Hang in there a little while longer. It will be worth it.

 

The new latches do not need covers as they are weatherproof

 

Good to know, thanks.

 

How’d you attach the quick fists to the molle panel?

 

i used these

https://www.putco.com/product/molle...KvsYZ05sjwpfv3NLvC8oiFbhlgRgfHmRoCrXIQAvD_BwE

 

So I got my roof rack done . Uses the same extrusions for crossbars that are found on Prinsu racks . Bedslide load out is somewhat configured , just need tie downs to keep everything in place. Lovin the utility bin for locking up critical equipment. The passenger side gives me access to a honkin big Pelican case mounted length wise on the Bedslide .