Shop Time w/T.W. Friends

I just bought some 140° inclusive chamfer mills. But yeah, fun angle!

 

These look yummy.

 

I had to break out the adjustable table and do 35° on each side.

 

This is a piece of 1 1/2” hot rolled, water jet, and blanchard ground.

 

Dang!!!! I need a table like that. I just have a small 5" sine vise!

 

We had to buy 2 of them years ago for a job, they do come in handy. These are 10" long.

 

This one has a screw handle on it, that would be nice. Ours doesn't.

$122 BestEquip Tilting Milling Table 10x7" Tilting Angle Milling Machine 0-80°Adjustable Swivel Angle Plate with 3 T-slots and an Adjustable Crank Handle Heavy Duty Tilting Milling Machine for Grinding

https://www.amazon.com/BestEquip-10x7inch-0-90°Adjustable-Adjustable-Grinding/dp/B083FRJQPK?th=1

 

On the top of Bookcase coming home from work one Friday.

I was not sure if it was real after a long week.

 

What do you mean you wanted to save them

 

Then..............

 

I really hope that thing has some glass packs and a big crate motor with a lopey "hot for teacher cam" in it.

 

Oh I don’t mind clowns, not even evil clowns.

Spoiler

It’s just the creepy ones that creep me out

 

I've been summoned. For the record I don't grant wishes.

 

Bearings out too


For some odd reason I don't think the folks at Volvo used a hammer and punch to install them

 

89 4runner 3.slow headgaskets. They shoulda opted for the 3.4 swap. Clean truck.

 

That is slick!

 

That's what I tell people, it's a machine shop, not a magic shop

 

"machine shop" does look like "magic shop" from far away