Bilstein 5100 set at 2.5, rear aal 1.5 3 leaf progressive W NO TSB 2ndgen

Anyone run this set up? Every where I see photos they have the TSB leaf in, I only have 3 leafs and would like to avoid a nose high look thanks

 

I've installed this setup on a few friend's trucks. You should be fine. If it is a little nose-high, you can always slip in a spacer in the rear.

 

How does a rear spacer for back work? I’ve seen them the smallest in 1 inch, that would be 2.5 in the rear and the Bilstein 5100 are only rated for 1 inch right?

 

I bascially have 2.5' lift in the front and have an after-market HD progressive 3 leaf pack on top of the stock overload (so 3leaf + overload) and my truck sits fairly level with an ever so slight positive rake.

 

Rear spacers are just a block with a hole and a pin to go between the axle and the leafs to raise the rear some amount. They come in different heights.

Supreme Suspensions - 1" Rear Leveling Kit For 1995-2023 Toyota Tacoma 2WD/4WD - High-Strength Steel Lift Blocks with Square Bend U-Bolts Rear Lift Kit

https://www.amazon.com/Supreme-Susp...fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840&th=1