What Have You Done To Your 3rd Gen Today?

Finally programmed the PAC TR-7 universal trigger module and moved the Auto Highbeam switch to the @MESO Pro Shift Knob @caribe makaira









@Tacomacup Also did the tacoma cupholder mod:

 

https://caliraisedled.com/products/2005-2021-tacoma-trail-edition-rock-sliders

 

https://caliraisedled.com/products/2005-2021-tacoma-trail-edition-rock-sliders

just got them on today ill take some more pictures tomorrow

 

The root of all evil of course, Amazon.
I have an 88P, I wouldn't think most people need more than that. It's a really nice unit.

 

Is that a mount for a mora knife sheath? If so where did you get it?

 

I finally added (after 9 months) a blue VLEDS max pod in the rear to compliment the front footwell lighting.




I ran the wire and tucked it under the plastic panel front to back without removing the shifter panel. Just popped the rear console panel clips with my fingers and plastic pry tool. Five clips each side and the top part has a lip that is tucked under the cup holder. I used a two way splitter, 4’ extension and flushed mount bracket.


With @MESO dual reading/dome lights.

 

Can you confirm this is the part? Went to order one but looks like it’s a lot more then $38.
https://parts.toyota.com/p/Toyota_2.../Truck-Bed-Side-Rail/70528967/6540904010.html

UPDATE: Nevermind it’s part# PT278-35100-BH, around $40.

 

I would suggest checking your area pic and pull for a 2nd gen truck, and snag the channel bar off of it. Probably save a lot, that way.

 

Looks sweet. Gotta know about those side steps.

 

My guy, I like your style

 

Bought some after watching your video .

 

Drove around to pickup 8 walkie talkie. Find out 2 have broken antenna (the rubber part). Drive straight to a buddies house to pickup some sugru mouldable glue. Now everything is as good as new. Will be putting it to the test in a few weeks for a 2 days trip.

 

With ramps? I’ve used a normal jack and jack stands but not a ramp before

 

Replacing tacoma this week with a gx.........
Sorry but not really

 

Yeah, that's Mora's multi mount sheath. It's available for the Garberg and Kansbol knives. The one in the pic is the Kansbol...I ordered it with the mount. I also have a carbon steel Garberg mounted the same way to the strap of one of my backpacks. It's a great setup and very versatile!

 

so I could go to the same size tire without rubbing if i am present running a 265 70 R16

 

I'm running a 265 70 R16, could I put 265 75 R16 without rubbing issues? Then would i have to recalculate the tire pressure or will the truck adjust accordingly.

 

I have those too, just haven't installed them yet but mine are just plain. wonder if they will hinder the light when it snows or protects it some what.