What Have You Done To Your 3rd Gen Today?

Drove around to pickup 8 walkie talkie. Find out 2 have broken antenna (the rubber part). Drive straight to a buddies house to pickup some sugru mouldable glue. Now everything is as good as new. Will be putting it to the test in a few weeks for a 2 days trip.

 

With ramps? I’ve used a normal jack and jack stands but not a ramp before

 

Replacing tacoma this week with a gx.........
Sorry but not really

 

Yeah, that's Mora's multi mount sheath. It's available for the Garberg and Kansbol knives. The one in the pic is the Kansbol...I ordered it with the mount. I also have a carbon steel Garberg mounted the same way to the strap of one of my backpacks. It's a great setup and very versatile!

 

so I could go to the same size tire without rubbing if i am present running a 265 70 R16

 

I'm running a 265 70 R16, could I put 265 75 R16 without rubbing issues? Then would i have to recalculate the tire pressure or will the truck adjust accordingly.

 

I have those too, just haven't installed them yet but mine are just plain. wonder if they will hinder the light when it snows or protects it some what.

 

75’s are thinner mebbe a tad taller. That’s where any rubbing will occur imho

 

I need to go out there with a heat gun and a nicer day than today. But I’m not worried about snow hindering the light from the leds more the snow blocking the plate. I knocked that shit off. Less excuses for a pull over

 

So that's what it is. It looks like a vacuum crevice tool. Thought, man this guy is serious about keeping his console clean.

 

Yes for sure. I do have the roxblox mud flaps that are alot thinner tha the stock ones.

 

Tyger tonneau. Let’s see how this does…

 

Mines holding up real well considering it was the cheapest on the net.
North mountain brand. courtesy of Amazon

 

I think you could run them, Im lifted 2.5 inches and dont have any rubbing issues, but I dont think the lift would change where they rub on these trucks anyhow.

You just push the tpms reset button

 

I wonder if I need to hit that when I rotate my tires??

 

Funny to me, because when I first looked at it my initial thought was, "Why does he have a crevice tool mounted to his console lid?" Took me a minute.