What Have You Done To Your 3rd Gen Today?

Thank you!

 

Oooh, yeah that might be worth it. Behind that head unit, its a jumbled mess of wires, one more couldn't hurt!

 

There are some features that I do miss. Maintenance tracking, fuel economy data, and I'm sure there are others that I'm not remembering at the moment. If I could use Android Auto with the Entune, I probably wouldn't have swapped it. The quality of life is worth it though, IMO!

 

I thought there was an interface with the OBDII?

 

I believe @ClassyTacos has an install vid where he color matches his TC Bed Stiffeners. Also strongly consider replacing the top factory bolt when you do you install. Even with tons of people warning of its weakness, and torquing it to spec, I still manged to snap if off when adjusting it later on. The replacement hardware I found/used is longer, 30mm vs 20mm, but there is nothing behind it to interfere with the slightly longer bolt.

Good Luck.

 

I'm not familiar with that. There could be but I'm not finding any information regarding it. Do you have a link where I could read up on it more?

 

Rather than pay hundreds for a TRD skid plate, I took the OE one down, cleaned it, and painted it myself...

 

Stuffed a 315/70R17 into the spare tire mount. Might rub a little on the diff. Used a tie down to pull it towards the bumper

 

My bad. I thought this unit had that adapter as well. Looks like everything else OEM does have an adapter though.

https://stingerelectronics.com/products/sr-tac16h

 

Swapped to my winter wheels and snow tires.

 

Spring time for me. Thanks
Looks good.

 

@sphinxbccp Reverse lights blockers came in. Turkey day mod. Should be warm enough for the 3 m tape.

 

Reverse light? License light?

 

I painted mine to. Everyone has the same lame trd SP. MY SALUTE TO EVH

 

That's badass

 

Thanks bud. I get a lot of head turns. One lady stopped me to say I ran over something

 

That's pretty funny

 

Just to save anyone Google time, EVH = Eddie Van Halen