Icon RXT Leaf Packs

I just ordered a set of Icon RXT leaf packs for my 2021 TRD Pro. My question is what "setting" should I go with. Obviously the lowest setting will not work as its the stock weight. Currently I have a decked system loaded/steel bed rack/maxtraxx/cooler/rotopax/sliders and in the market for a RTT. I'm thinking ive added around 500ish(250 decked,150 bed rack,100 misc) pounds to the rear. I was thinking of going with the 600lbs setting. Im looking to gain back the stock rear ride height. Any help deciding would be greatly appreciated.

 

Subscribed- I don’t have a Pro, but I’m in the same boat,,, Decked and a bed topper (probably about 400-500#ish)

 

Subbed - Just ordered them as well. I’m between the second and third setting weight wise currently, but do plan on adding a decked system in the near future.

 

Check this thread out:
https://www.tacomaworld.com/threads/icon-rxt-leaf-pack.505580/

I have about 500# constant load with a Decked, Leer canopy with rack, tools and camp gear, and I went with option 3. I wanted to keep the rake, especially with added weight to include RTT and other gear.

I gained 2” of lift after a little bit of settling after 4 months. With the RTT I get about 1.5” of lift with about 650#.

Recommend adding grease to each leaf prior to installing. No squeaks so far for me.

 

What points did you grease ?

 

I pulled apart each leaf and greased the whole surface - from pad end to end.

The process is pretty easy. Just need some heavy duty C-clamps and a long screw driver to keep the metal shims in between each leaf centered.