Fog light aiming screw

New here and to owning a tacoma. I purchased some morimoto led fog lights to put in this aftermarket bumper cover and neither came with the aiming (or adjustment) screw. After an hr of searching I cant find a single thing. Anyone know of a link for these screws? Oh and the truck came without a bumper or grille so im running into hardware issues left and right. Thanks

 

Many aftermarket fogs do not have an adjustment screw. You must manually aim by tilting the assembly from the face. Typically this works best if you tighten the unit enough to hold it in place, but also loose enough it can still be manually adjusted with some minor effort.

 

Tighten how? I thought our fogs just snapped into place, pressed in from the front.

 

OP, if you have a source for a failed/broken fog lamp, you could remove the adjustment screw. It's not sold alone.

 

I have said Morimoto fogs (great btw.), and I had to scavenge the retainers and screws from my stock ones.