Sold axle swap '14 TRD Sport on 40's, Chevy 63", Adventures, picture heavy

Mix of picture, some from the last time out on the old rubbers. And some of the new.

 

This thing just keeps getting better.

 

Lifted the rear up with the 40s. These tires are massive.

 

All SAS tacomas on 40s…

Ya’ll need help.

Went out seeing what my truck can do. It made everything easy… Now I’m over here looking at untouched waterfalls thinking “that could be a line”. Even though I know it should NOT be a line.

 

Making 40s look small.

 

Did you end up getting the speed sensors working for the auto tranny to work?

trucks looking awesome!

 

I appreciate it.

honestly haven’t looked into it yet. I’ve been busy with other things. I have a couple ideas that might work.

 

Sounds good! Looking forward to is. I have read such mix things on the speedo working with the auto on some trucks and it hasn’t been an issue on some annd has been with others. Internet….

assuming yours doesn’t go into limp mode that bad since you are driving it around?

 

I tried to drive it without and it drove awful, the truck did all sorts of strange things so
I had to tap the front sensors into the rear axle unfortunately for now. So I do have a working speedometer but it’s a matter of time before I just grenade the rear axle. Every truck I’ve seen that is 05-11’ doesn’t have an issue using a transfer-case vss. Still looking for someone with a ‘12 and newer solution.

 

Ah okay. I may be able to get away with the Vss then. I am slowly, slowly building a 14 bolt so just figuring out details for that.

 

for the 05-11 trucks it is super easy to get the speedometer to work…. There is a thread wyatt(rst) posted years ago on how to do it step by step that’ll work. But on my 14 it won’t, my wiring is different unfortunately.