What Have You Done To Your 3rd Gen Today?

I eventually got tired of looking at the scratched instrument gauge cluster in my truck, so in an effort to start fresh I got a new gauge cluster and the Screen ProTech kit. I also added the protector for the gear indicator and the radio touch screen.

A few things to note:

-This is pretty simple to do, and there’s a QR code you can scan with detailed instructions if needed.
-Take your time, especially when pulling the dash pieces out. The plastic tabs can break if you’re not careful. I used a trim tool to gently pop it out.
-I found it useful to position the steering wheel extended out and all the way down, plus putting the blinker and wiper sticks in the down position. This allows for more clearance getting the cluster in and out.
-There are 4 screws that hold the gauge cluster in, plus 2 electronic ports and 1 plastic tab on the back. They’re pretty easy to disconnect.
-To separate the cluster glass you need to remove 8 screws on the back with a T15 bit. These were torqued pretty tight from the factory so be careful not to strip them out.
-I managed to get most of the air bubbles out but there are a few small ones that should clear out in a few days.

Hopefully this may be of help to anyone considering doing this. I’m just glad I don’t have to see that terribly scratched glass anymore! And yes, I did find the Taco easter egg hidden behind the instrument cluster.

 

You got a link for that tablet mount? Looking for one just like that. The only other I like so far is the tackform one. Thanks!

 

Screen protector is that the name on the Amazon site?

 

I tried the very conventional grill lights addition, but chose a non-conventional color (white). And I did them for a stock OR grill; most are for Pro grills.


Then I realized I need a little more knowledge. So if anyone has tips/forum thread suggestions go ahead and DM me. But be kind, I'm fairly sure this is basic stuff for most of you folks.
- What should I connect them to? I thought the fogs would be reasonable but the grill lights stay on regardless (connected with one of those tap a fuse connectors). So I did something wrong
- How to get extra wires into the fuse box (and close the cover of course)
EDIT: @Rocket23 sent some tips; and there is a nice video at Tacoma Lifestyle (https://www.tacomalifestyle.com/blogs/news/how-to-install-tacoma-raptor-lights).

 

ScreenProtech is the product; they have their own site and sometimes discounts (TW doesn't let me post the URL but I'm sure you can find it). Note you don't have to remove anything if you are just adding the film.

 

I received my Cyber-Monday OEM accessories:

• Bed mat ($119)
• Front bed rail (2nd gen) ($27)

The parts guy didn't want to help with the bed rail since it was a 2nd gen part. The holes line up perfectly. However I can't install it for a while as I need to take the tonneau cover off (normally a 5-minute job) but I blew my shoulder out last week so I only have one good arm.

 

Nice write up. I struggle with the clips to the right of the steering column. From the looks of it, you might as well have replaced the head unit while you were there. Is that the entune premium?

 

Picked these up today. They look so much prettier in person.

 

Nice to know it matches.

 

That’s wild because they look so good in that picture. Very nice.

 

Always loved these wheels

 

Call me cheap. But that’s too pricey for something that is essentially just a plastic screen. Mine are fine for now I use a well moistened micro fiber cloth with an ammonia free cleaning solution

 

Use this harness it picks up both the drl & marker light feed & Its plug & play
https://fbchs.square.site/product/t...true&sa=false&sbp=false&q=false&category_id=4

 

$27?? Where’s that?

 

Picked these bad boys up! Ordered them for my 22 TRD OR on Black Friday, got here today and installed. I stayed with factory size. These are methods MR703 16in 6x139.7 with a 0 offset on factory tires. The stock rims where a +25 so they barely poke but has a great stance and they look sweet! Got them at discount tire for almost $300 off.

 

That is not the Entune Premium. I believe it had the bigger screen with navigation, if I remember right. I think mine was called Entune Plus. Upgrading the head unit is something I have considered, especially to get CarPlay and a little more power to my speakers. But that’s some money I don’t want to fork over right now.

 

That BDRM looks sooo good!

 

Agreed.

 

i installed this roof rack that I was super excited for! Maybe some lights up there next?