1st Gen Lunchtable Thread - General Discussion

Fuck...I should've told him to bring it tomorrow so we could chop it up.

 

if that frame can make it to SLC it would make life soo much easier. legit no freelance trucker i talk to will take their rigs into cali because of the bullshit laws. and larger car shippers wont touch it because.... its not a car.

 

and a uhaul would be north of 3500 bucks one way to bring it back.

 

That's a Tale as old as Time

 

Feelin' better from the meds?

 

Can confirm i never heard it chirp a tire once. Not even at the mall

 

Absolutely; I mean nose is stuffy but body aches are mostly gone and so is most of the cough.

Headaches are a common occurrence with my TBI and all though.

 

Good to hear. Down with the sickness absolutely sucks.

 

It's left me rather Disturbed for a day or two tbh

 

It was one thing having to fight this fucker off, but near one of the last missions...I had to fight off like 5 of them

 

Do SPC UCA joints creek when they start to go out? I've been greasing mine at least every 3,000 miles. Now they creek like a squeaky door hinge then I turn with weight off the truck. I've tried greasing while turning to no luck. They are tight and don't have play. They are just getting noisy.

 

@0xDEADBEEF

https://youtu.be/g-8YJMlbRpk

 

How odd. I’ve had them do my alignment once and never had to do it again. It’s been years.

 

That's a lot of travel.

 

When I first installed them, they did creak a little. Don't remember how long that lasted. Have no issues with them now. @eon_blue - you?

He's the shit man, best alignment tech. Not sure what happened this time. It was a 4pm appointment and he wrapped it about 5 ish so maybe that played into it. IDK. When my new coils come in and they're on the truck, going to go back anyway to have re-do it.

 

Maybe I just need to take them loose and clean out the boot and regrease them while turning the ball in the socket and listening for any creaking noises.

 

Best part about Sunday mornings is no one is on the roads.

 

Mine creak like a mofo but it's the bushings. Replaced them and they were quiet for a bit but started up again. Need to just replace the arms entirely because when we did the bushings, found there was water pitting in the arms/bushing sleeves. No idea if that's causing the noise but probably isn't helping

Mine sound like barn doors over every dip/bump in the road, I've just been living with it lol