LT classifieds

I have a brand new pair of kings

 

Dm sent

 

There is a lot of details that need to be paid attention too more than just 2.5x8. End length, eyelet size, if they are remote resis the fittings, hose length, etc.

 

Anyone have a filler neck laying around that needs a new home? Broke mine when trying to finagle it back into place.

 

Not my first rodeo
Thanks for the concern tho.

 

I still have the Radflo's in my storage. 2.5x8 I have 18" 600lb springs for them. Adjusters on the resi

 

How much area you asking?
Milage? rod end length?

 

10miles? They didnt work well with my JD setup.
Rod length 7.5. Limited internal with a rubber bumper. Was supposed to be built to JD specs. Have the spec sheet. Valved 15/15 F20/12R. Bleed 2O
1500 shipped?

 

Whatcha doing out back? You going to use their cantilever system, they are the ones that took that over right?

 

@DocME
The cantilever system is a sweet set up. Txmade_125 4runner seems to be running pretty well for him.
I've gathered most of the parts to do a canoe style short course 3 link. Antirock sway and Currie9 from my last project.
Or install my jeepspeed tank behind axle. 4link and ditch the panhard.

 

The one issue with TXmade 4runner. Is he's always into the bumps. He's trying to change up some stuff to get more up travel. But its the one limiting factor for him.

 

That’s just a limitation for 4Runners in general unless you cut into the back seat.

 

It’s the same issue with the Tacoma unless you cut into the bed. Frame mounted shocks are the issue.

 

I think thats what he is doing next. Just to plan it out and do it right. Plus the down time

 

Correct. A new upper mount is required no matter what. But I’d say going through the bed seems less intrusive than going through the cab on an SUV such as the T4R

 

I went with a canoe Three link from dirt designs along with a Dana 60. So far so good. If I did it over I would’ve gone with a bare 9”. Rear pulls 16” of travel but as other have said, you get into the bumps pretty quick.

this->

this is so true. I carry a hefty rake to try and limit bump interaction. Wasn’t going to cut into the rear cab. I’ve got kiddos that love going with me.

 

you ever gonna do a build thread or anything? Always been curious to see all you’ve done.

 

@DocME has done some pretty cool stuff to his FJ.
FJ build

Steve over at Dirt Designs emailed me last month and said he might do another run of that rear kit.

 

Stink bug look.
He does drive the piss outta it. Took a bit to get his courage up last time he came here in AZ and we went to the cinders. Thats where them jump videos came from.
Next time I see him will be KOH.