What Have You Done To Your 3rd Gen Today?

Can you drive while the lights are still on? Or does the outlet shut off

 

I would tend to second that. Additionally adding some weight in the bed helps also. The rear end can get a little squirrelly on compacted snow & icy spots.

 

The outlet drops down to 100w when driving. Depending on how much energy the lights need, this may not be sufficient to run them. Redside Electric via Guild Outfitters makes a bypass that allows you to run the 400w output while in motion. Also has a breakout for an internal outlet. 10/10 would recommend.

 

That’s something I need to get in the near future. Thankfully, it doesn’t start snowing really bad until the beginning of the year, usually.

 

I need to work less and play more. So, that’s why I’m building the truck up. I don’t get out to the ski areas often enough but I’m hoping to change that soon.

 

Hoosier Pass was a skating rink on Thursday, as was Vail Pass and Glenwood Canyon. You never know when it’s going to hit, personally I keep weight in my truck from October through May. I’m in the banana belt on the Western Slope now, but I lived in Leadvegas and Gunni for a long time.

 

Going to be doing the same to mine shortly. Sold my snugtop last week, waiting on the materials for the bed rails. My GFC topper should be ready in mid January. Can’t wait!

 

Don't know about Colorado but the ski areas in Alberta have been open since Nov. 3. Lake Louise had World Cup downhills and gs on Dec 3 and 4. Tons of snow here eh . Have fun and be safe in and on the frozen rain.

 

Looks good. I got tired of the way my truck looked after I washed it with the clear film. Always looked dirty with the buildup of mold and mildew under the film. Removed it off the hood, mirror backs, under door handles and door edges. Looks so much better now.

 

They looked good in the picture. Just ordered high beam, low beam, and fog LASFIT. (Not surprising but Amazon was much cheaper than ordering directly from the company.)

 

Not sure you got any info on this yet as I am playing catch up on this thread. I had my dealer install the clear film which was a Toyota product and after a few years I got tired of the way it looked. You can go to the thread below and look at post #243216 where I posted a few pictures. Hope it helps.

https://www.tacomaworld.com/threads...3rd-gen-today.399305/page-12161#post-27754078

 

That's terrible. I have had the 3M on my 2009 and 2015 for since new and still no issues and just added it to my 22 hoping for the same results.

 

That's great that you haven't had the same issue as some of us. Good luck with the film on the '22.

 

HomeLink v5 rear view mirror install, and video tut.

 

Installed a few items today

• Weboost OTR
• Radio/Antenna
• Roam case mounts
• Apex Tire Deflator Valve Stems

 

Impression of the weboost?

 

I had the Bestop on my 2ng gen for 2 years, so I bought it app 3 years ago,,it was bought to fit a 2nd gen but it did come with a second set of rear bar brackets guess I will have to look for them

 

I swapped out my reverse lights to led as well but sometimes I just need a little more light. Installed these on a switch and it really adds light when I need it.

https://www.superbrightleds.com/off...-driving-light-5-5-rectangle-12w-1-350-lumens

 

CAI on my 2019 3.5L

 

Finally got out the ladders and put my batwing on. Not fun by myself but its on