35 nitto mud grapplers on 6in rc lift?

hi guys. i have a 2017 tacoma with a 6in rc lift and i’m wanting 35x12.5r17 nitto mug grapps

i have 17in 4runner stocks i’m putting them on

will i scrub and what do y’all prefer?

 

That's a dangerous question to ask TW when you have a 6" lift.

 

ehh. i guess so. i’ve ran many different setup on my tacoma so far from wides to reps and i sized down to 17s now.

ready for 17s and 35s instead of 24s and 35s

 

Yeah get ready for the downvotes lol

 

But really, what is your question? You're already running 35s so you should know your clearance.. one thing for sure is you'll need wheel spacers for those OEMs to fit

 

i have spacers on since i was running 24in chevy flakes. just wanting to know if i’ll scrub running these tires because of the side wall and wheel size , yes i know it sounds stupid. but i’ve ran bigger wheels and tires more then stock sizes

 

No judgement from my department, just being clear on your question. You probably won't get much feedback on running that specific tire with that setup on TW. But i'm assuming you had to be scrubbing already unless you did some trimming..

 

wasn’t scrubbing on the chevy replicas “snow flakes”
it was a 24x9 wheel i believe and 35x12.5R24 Haida Mud Champs. never scrubbed (only on a small incline at full turn )

but not major scrubbing

 

You'll likely have a bit less scrub since the OEMs are only 7.5" wide so wont be pushing the tire out as much but the difference will likely be unnoticeable. Follow up though, sounds like you're not doing any hard wheeling so if you're only worried about scrubbing on the road why don't you go with 37s?

 

budget. just wanted some grapps. i like the aggressive look over the street and AT tires.
had the ridge graps and wanted the mud grapps
something different. i actually been wanting to take my truck mudding more. so these tires will actually have some purpose

 

If you're serious about going mudding, I'd go with a smaller wheel diameter, so you have more sidewall.

17's:



16's:



OR...My preference, 15's:






When your cab deep in a mud hole, you want a lot of side wall to help get you out!

 

He has to run 17s (or larger) because of the DB lift

Edit: or use massive wheel spacers

 

DB lift? lol

 

Drop-Bracket. multiple companies make that design lift obviously not identical

 

Why is it a dangerous question on here? Just curious

 

You will definitely want to do some trimming if you start wheeling more with 35s

 

come on.. asking TW preference regarding a DB lift..

 

Still not understanding the prob?

 

ehh. to me it was just a kit to put on some 33s at the time
then i went to 24x14s on 35s scrubbed. then got 24x10 on 35s and hardly scrubbed

 

Many feel strongly against them and tend to be quite condescending to those who choose said build route. I've seen some pretty heated discussions on here, gets personal fast lol