What Have You Done To Your 2nd Gen Tacoma Today?

Updates

 

Installed inverter to back of truck using num 2 wire and busman 120 amp breaker

 

Installed some DD max yellow fogs and swapped out my trio of BD Xl's for an OnX6 light bar.

 

Working on bunk setup in my 2015 long bed with a ARE cap. The plan is to have a 72"x28"x4" foam mattress. the forward compartment will eventually be for the house battery. The side will have recovery gear. Once I buy some. and a big pull out drawer for kitchen stuff, dry goods and clothes. I still have a lot to do. This was day one. I saw a lot of folks using 3/4 plywood for their bunk builds. I opted for 1/4" as the base layer with reflectix glued to the bottom. Then I used 1/2 plywood facing the cabin 1x12 for internal framing. I will used a 1x12 for the drawer and have it friction fit. The drawer is around 50"long. I plan on putting a reflectix base layer on the cap ceiling with indoor outdoor carpet as the finish layer. I know that reflectix is not intended for this application in terms of maximizing its R-value, but I thought every little bit can help. I will post more as the build continues.

 

Got my bumper back from powder coating. Just waiting on my @Diode Dynamics lights to come in. So many parts to install. Can’t wait.

 

I spy DeGarde!

 

I had a 2005 king ranch F250 with 170K, I had already studded and deleted it then it cracked a head and was pushing fuel into the coolant. I let it set for a couple months trying to figure out what I wanted to do with it. Then traded even for my buddies 2010 TRD OR that he bought new when we were in college. one of the best decision I ever made.

 

traveling light show

 

Getting my 4Runner trail Wheels, and some rubber put on.

285/70R17 Wild peaks

 

Anxious to see how the wheels look in bronze

 

Yeah me too. I have to wait for that though needed tires ASAP. So I just got them all mounted up for now.

And thanks for the recommendations on lug nuts and TPMS sensors. Everything installed with no issues.

 

I think they look good as is though I am biased. Like the tire choice and size. My 265/70 street tires only have 2500 miles on them but I def like look of your WILDPEAKS better. What do you have for front lift/suspension.

 

Yeah I like the tires also. All I have for a lift is 5100's up front (removed previous owners spacer lift garbage) and previous owner add a leaf if the back which I will be getting OME's soon hopefully. Trying to get all the maintenance and repairs done first for obvious reasons lol.

 

Got an alignment today… Techs at the shop said it was pretty bad. Feels like a new truck!

 

That's my next task.

 

Cheap mod added a net on ceiling of cap perfect for zip lock bags, head lamps extra wires pillow towels dirty cloths.
Next , Purchased some brackets and made a folding table off storage box

last added light under hood all cheap usfulmods

 

Updated and currently wait for powder coat of at the helm rear bumper

 

just turned over 199k.....another k and it gets it's 200k patch. 100k patch will move into the 04 xB in about 5k. 300k patch waiting patiently in a drawer.

 

Installed one of the 4x4 switch led kits today, along with 2 LEDs to light the center console area. The tech deck mount has 2 holes for a center support that were perfect for 5mm LEDs.

 

Replaced my Rear Diff Lock Sticker. I have some extras for sale here. https://www.tacomaworld.com/threads/rear-diff-lock-sticker.787410/#post-28177405