Steering clunk just off center

I have a 2007 regular cab 4x4. 37's, Yada Yada. Recently after a wheeling trip, where I broke a cv(over extension), I developed a clunk. It is just off center, and seems to only be when you slowly ease into turning it. If you turn normally or even quicker it's not noticeable. You can definitely feel it in the wheel. I replaced these parts as it was needed, but the noise was there before:
Upper uniballs
Lower balljoints
Cv axles
Wheel bearings
Diff seals
lower AND upper steering shaft

I honestly thought the shaft was the issue as it had play before, but that play is gone yet the clunk remains.

I will say, back in February it had a new OEM steering rack with poly bushings put in. The sound, however, did not start until the wheeling trip, specifically after the broken cv.

 

Did you replace outer tie rods?

 

They were new when I had the rack installed. I finally found the clunk, just forgot to reply here. I torqued the two bolts holding the steering rack, and voila no more noise. They must have worked lose over time.

 

Gotcha. Where did you order your rack from? Been waiting on a new one since July….

EDIT: what did you torque the bolts to for reference?

 

I got it from Toyota...with employee discount the cost difference was negligible. Torque...the German way. Gut-en-tight

 

Which dealer, if you don’t mind me asking?

 

I used an independent mechanic for the repair, but picked the part up through Kenny Kent Toyota.

 

Thanks. Just reached out to Kenny Kent. I’ve been waiting on a rack for almost 6 months. I really need to take care of it before it fails.