TRD Pro Fox Shocks (OEM take offs)

Did you have to upgrade the brake booster or add a propagation valve

 

No. The MT comes with the bigger master cylinder. SOS sells an upgraded MC for the AT.

 

Nice i have the stoptech front and they stop pretty good when towing a boat and loaded up with gear. Thx for the info

 

Now splitting and shipping. Let me know what you want and where you want it to go.

 

Front coilovers sold. Rear shocks and leaf springs still available.

 

Front and rear shocks sold! Rear leafs still available for pick up. Supposedly approx 1” lift over stock.

 

Looking for front 2020+ suspension

 

where are you located? I’ll have a set in a month or so when I side-grade (upgrade?/downgrade?) to Bilstein 6112/5160.

 

I'm in NorCal/northern Nevada. I'll pay for shipping if necessary

 

Anyone know if 4Runner trd pro fox shocks the same as the tacoma ones ?

 

Go to Westcott designs website. Likely find your answer there. I don’t think they are all the same

 

Oof. I'm in VA.

 

Would you be willing to ship?

 

I’ll have to think on that.

To be 100% transparent the front shocks currently have the Westcott Designs preload collar on them without the top spacer (nets about 7/8”-1” of lift). I would not be removing that, but would include the stock shock collar and the Westcott top spacer. If that’s a deal breaker, then shipping is moot.

 

That's perfect. I was going to add on the westcott lift. How many miles does the suspension have?

 

Awesome. Let me know when you're ready to get rid of them and we can figure out a price

 

Sounds good. It’ll probably be 2-4 weeks bc I go out of town for a week next weekend.

 

They are not, the rear shocks for the 4R pro have a different sized lower inlet bushing; their valving is also different given that the 4runner does not have leaf springs in the rear and the weights are different.

People do run them, so it isn't impossible you just need to press out the lower bushing for the rears and put in the appropriate sized ones.

Hope this helps.

 

Are the fronts the same?

 

They SHOULD bolt right up, I’m not sure if the spring rate is the same and the valving is for sure different