What Have You Done To Your 3rd Gen Today?

What are using the pipe for?

Serious question but feel free to insert a "birds and bees" joke

 

Water storage im gonna assume.

 

Finally fixed/ replaced airbag clock spring on my 2022 Taco SR after installing the factory fog light turn signal. Anyone need help hit me up before you start.

 

Ahhhhh yes I think you're right.

 

Water when camping for cleaning pots and pans. Kids feet at the beach. I plan to paint it matte black in hopes the water will warm in the sun. Doubt I’ll shower with it but I definitely could if needed.

 

Cool idea. How many gallons you think you fit?

 

Are you pressurizing it? If so I'm guessing that's what the upward valve is on the front and do you have a link for it?

 

I couldn’t believe how noisy and cheap feeling and looking inside the Rav4 was.

the CRV felt way more premium. I also like the new design. Honda design age pretty well.

 

That's what I was hearing, mostly from automotive review comparisons. I like Honda's new design language, it's fairly conservative and mostly straight lines. Seems like Accord was the 1st to embrace this language, current Ridgeline and Pilot share a bit of the straight line design, it's very evident in the new CRV the styling is a little reminiscent of Ford, but more conservative. The new RX has a similar vibe in the front with the flat top hood which looks good, I'm not going to confuse a Lexus for a Honda however. The current Rav4 isn't bad looking, but I would say the styling is very progressive for Toyota, more reminiscent of Hyundai or KIA, IMO.

 

Added the Bilstein 6112/5160 combo and Icon AAL awhile back, but finally ditched the predator steps and got around to installing my shopping cart protectors today.

 

A bit short of 4 gallons.
Was able to get about 30psi but lost it pretty quickly. I need to add a pressure relief valve set to 30psi and continuously run a compressor while using it. Looking to get a cheap battery operated one.

 

What shift knob is that and how did you get the factory boot to stay up?

 

Thank you! Glad it’s done lol

 

I used the AuxBeam for switch power to the ARB relay, so no. The AuxBeam has a 30a block, so I'm pretty sure you can direct wire it; I felt more comfortable doing the way I did. Just used a 10a block to send power to the ARB relay, (red and black wire that would go to the provided ARB switch). bought this mount from a vendor on Etsy:https://www.etsy.com/listing/125656...68075&click_sum=effadbc3&ref=shop_home_feat_2

 

I've got a matching cap rack for sale if you're interested. $500

 

Did some final prep for my GFC topper install. Filled the gap on the bedrail towards the cab. Used 3M strip chaulk and black RTV over that to seal it. After my trip driving down to Florida last month my legs were fatigued. So installed seat jackers and will see how they go driving up to New York this weekend. Feel good so far.

 

My kids got me a new MJJC pro foam cannon for Christmas. Did a wash with Adam's mega foam. Then a blow dry with the Ego, finished with a Grants drying towel and P&S Beadmaker as a drying aid.

I'm going to polish and Ceramic coat before too long.

 

https://youtu.be/0r7vxa93QTw

 

Modified my hitch skid to use with my new bumper.

 

Ride rite airbags. Been towing my quads a bit lately, and needed some help. I'll give these a try for a while.