What Have You Done To Your 3rd Gen Today?

Added the Bilstein 6112/5160 combo and Icon AAL awhile back, but finally ditched the predator steps and got around to installing my shopping cart protectors today.

 

A bit short of 4 gallons.
Was able to get about 30psi but lost it pretty quickly. I need to add a pressure relief valve set to 30psi and continuously run a compressor while using it. Looking to get a cheap battery operated one.

 

What shift knob is that and how did you get the factory boot to stay up?

 

Thank you! Glad it’s done lol

 

I used the AuxBeam for switch power to the ARB relay, so no. The AuxBeam has a 30a block, so I'm pretty sure you can direct wire it; I felt more comfortable doing the way I did. Just used a 10a block to send power to the ARB relay, (red and black wire that would go to the provided ARB switch). bought this mount from a vendor on Etsy:https://www.etsy.com/listing/125656...68075&click_sum=effadbc3&ref=shop_home_feat_2

 

I've got a matching cap rack for sale if you're interested. $500

 

Did some final prep for my GFC topper install. Filled the gap on the bedrail towards the cab. Used 3M strip chaulk and black RTV over that to seal it. After my trip driving down to Florida last month my legs were fatigued. So installed seat jackers and will see how they go driving up to New York this weekend. Feel good so far.

 

My kids got me a new MJJC pro foam cannon for Christmas. Did a wash with Adam's mega foam. Then a blow dry with the Ego, finished with a Grants drying towel and P&S Beadmaker as a drying aid.

I'm going to polish and Ceramic coat before too long.

 

https://youtu.be/0r7vxa93QTw

 

Modified my hitch skid to use with my new bumper.

 

Ride rite airbags. Been towing my quads a bit lately, and needed some help. I'll give these a try for a while.

 

cant hardly see it

 

One of my coworker from my previous job has a 1st gen Tacoma and he never change his oil. His truck still runs perfectly fine.

He said that his truck is leaking oil that he need to top it off weekly. So base on his calculation, the truck pretty much doesn’t need an oil change.

 

It’s a work in progress you know.

 

Finally got new wheels and tires on-

 

Are these the “trail rails”? They look less aggressive than sliders- in a good way.

 

How do you like the M1 setup? I am preparing to buy a set of the 2 inch coilovers.

 

Just bought a new one for my Tacoma. So nice I bought one for my son for his 4runner. Good quality bag!

 

Yeah, one of the ears broke on the filter cover. I saw it break, but didn’t realize it was a whole hole through the housing. Soon as the oil pump kicked on it shit and splattered 6qt of oil all over the floor, by toolbox, and a wall. Lol easy fix but pia to clean up

 

Where did you get that console cover??? Cant find anything like that. The stock console is jacking my elbow up.