What Have You Done To Your 3rd Gen Today?

Got my BJ70 emblem in the mail and got it attached … perfect fit

 

You would make an awesome neighbor

Does anyone know why it is that newer cars have no tow hooks or even places to connect a tow rope? I'm not expecting recovery points; just something basic to give a little tug. A friend got stuck last year in a MX5 and there was literally a flat plastic sheet under the whole engine compartment; absolutely no place to connect a basic strap. Just curious so that I can be helpful but not be stopping for situations I can't help with.

 

Most modern cars have little square panels in the bumpers that pop off to access a threaded hole which you can screw a tow hook into but you then have to hope your car came supplied with that threaded tow hook.
The hooks are usually stored with the spare tire and jack in the truck of cars.
I believe they do it this way because the cars are so low to the ground you would probably damage the bumpers if you were to tie off to the underside of them.
My wife's Mazda 3 didn't have the hook from the factory so I bought one for her incase I have to pull her out.

$34 Mazda Tow Hook - KD53-50-EJ1B

https://www.amazon.com/gp/product/B01MTK1SXB?ie=UTF8

I found it easier just to use the traction boards because you just toss them under the wheel and off you go. No need to dig through peoples trunks.

 

@tacotrdyota

Get to it!

Those look like the "smoked" ambers!

You may not have to take off the whole grill like I did to swap out.

 

Vendor?

 

Ooohhh my dogs hair would love those

 

That's a great-looking grill...

 

Lol quote of the year thus far

 

Finally got around to getting wheels and tires after my lift. Looks so much better now

 

Not me but my daughter. She got wheels & tires for xmas, Method 316 with 265 Nitto Terra Grappler G2's. IMO it's a much better look than the SCS Ray10's they replaced. Hate that fake beadlock that are on so many wheels today.

 

Conditioned Clazzios with Lexol. Nice sheen and soft!

 

Yup they are the smoked ambers.

 

After helping people get unstuck this morning I decided to go get myself stuck in the snow instead.
Went to go cross country skiing and the parking lot hadn't been plowed but I figured I could make it through the lot.
Made it about 20 feet in and got stuck, guess I should have just turned around when no one else was there.
Once again I had to get out the traction boards to free myself.
My cheapo X-Bull traction board, that had started to crack, finally split in half
I got maybe 10 recoveries out of the boards over the last 3 years.

So I figured instead of spending another $100 on boards that will break under light use I will go big and order a proper set of MaxTrax MK2 boards.

 

Fired her up, sat in her then said night night. I dont drive el diablo taco innthe winter

 

You have a fair weather only Taco? Incontheivable!

 

That looks fantastic!

Specs on the wheels/tires?

 

I know many would say not to do it, but I’ve used a soft shackle around alloy wheel spokes if the person isn’t stuck badly. When it’s someone stuck in a driveway or hung on a drift, a light pull while their car is in neutral is all you need. Every time I’ve done this, the wheel that’s being used just slides with the pull and doesn’t turn causing any binding. Again, I only do
this when the need a small pull. Other than that, not much else you can use/do. The screw-in tow points aren’t very good for pulling lateral, but are ok when pulling straight on.

 

Finally got everything together for my lift.

OME 885/5100s
Icon rtx pack

Also tuned it with kdmax9.0

Very happy with both

 

The other half of my Goose Gear seat delete arrived today so I installed that and put my new plate on. Yea I didn't obscure it because I ride around all day with it exposed so not real concerned about someone seeing my license plate.

 

https://www.4wheelparts.com/p/goril...it-black-k6cs-12150bgr/_/R-FHMH-K6CS-12150BGR

I picked this set up, they are holding up well. Just rotated the tires, no sign of rust.