Rear Shock Size Kings after AAL

I'm lifting my rear and wanna put some non resi kings on the back with the 1.5" aal anyone have the code or size for those shocks?

 

Just call them.

Go custom, since King only offers OEM-length shocks off the shelf for 1st Gen Tacoma's.

Not aware of any off the shelf non-res variants though.

 

they have 2.0s in pretty much every size ever with no resi had them on a custom 4 link ranger but yeah I could call them if its not much more expensive

 

You didn't read what I said.

They have tons without resi, but not off the shelf for a 1st Gen.

So call them.

 

I actually have my Rear 2.5" Kings that are for stock to 1.5" of lift for sale at the moment. They do have a resi mounted to the shock body. I sent you a PM if you are interested.

 

Those look a bit beat, hopefully you're not asking much.

 

But they're kings and blue bruh... com'on, let's be real here. They're not beat, just properly used.

He know what he got, stop low balling

 

Factor in rebuilding those shocks, replacing the alignment spacers, and possibly having to replace a shaft or two, on top of the cost of those used shocks the OP is better off buying new.

Personally, I'd opt for longer shocks and do a custom shock relocation.

Factory setup sucks and if you're going to spend the money for some quality shocks, might as well gain some travel while you're at it.

I'd go ADS or at least Fox.

I know you know this, this is all information for the OP.

But really, best advice is 40s N TONS

 

I think what you want are the tundra rears

 

1st gens use a different setup than the tundras. wont bolt up to a 1st gen taco without custom mounts

 

That's why it's BEST to buy new. It's someone else's junk already, that's why they're selling it.