Evap code po446

Had Autozone read the code. Here’s the print out and is this the part in second and third pictures? Should I stick with denso?
99 3.4l

 

Might want to check this...
https://youtu.be/kmNIY8dK7sQ

 

Is this the same part

 

I dont understand why is says its an EGR vacuum solenoid when thats an evaporative code

 

Interesting. I’ll have to see if I have the stuff to do this

 

I bought a used one off flee bay.....

1996-01 TOYOTA CAMRY OEM VACUUM SWITCH VALVE VSV # 90910-12201 or 90080-91203 | eBay

You can hook up a 12v power source and test it....blow thru it...
I would look closely at all the tubing in/around the canister........

 

There is a lot of things that can cause that code.....

anything amiss in the whole fuel system.....

could be simple as a new gas cap....

on mine I think(idiots guess) i didnt get the tank seal correct when I switch fuel pump few months back....

You should get a whoosh when u release gas cap....

I get that code every other tank.....


That switch is very generic....you can get used, new denso, new asin....

 

https://www.walmart.com/ip/Vacuum-S...id=&affiliates_ad_id=1285211&campaign_id=9383

 

I've got the same code. Not totally sure where the problem is. Replaced the gas cap and vacuum tubing in the engine. Still throwing the code. That walmart link can't actually be Denso right?

 

I was curious too.... I ordered coils and crank sensor from denso direct in california.....
they did not have these listed in inventory.....