TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

Already using one. I noticed after it's split 2 ways they are finicky.

 

Winner! And it's the same on the tundra

 

I've had this experience as well. Confirmed cable was good but the split signal just caused issues with devices.

 

We want more pictures of that fine TVS blower.

 

This has been my experience as well. If anyone has one that works please share where you found it because I'm 0 for 3 with one that works correctly with my headunit and the ultragauge. Best I've found is one that I have to unplug because whatever is plugged into the 2nd port on it will not power off with the truck.

 

To get the pulley off without damaging the threads

$1.25 at home Depot, M8 x 1.25 x 10m

 

I'm starting work on it this weekend! But still waiting on the custom pulley to come in

 

Everything has shown up besides the blower belt.. that should be here tomorrow at Napa.

I'm working on modifying the Steeda tensioner to clear the Tacoma bracket now.. I cut the spring down, but the cast body is slightly different. @zscott I'm wondering what your solution was for that small portion? Looking back through this thread I see he is running the Steeda.. but little info on what the solution was. I will most likely grind down the cast on the tensioner just enough to clear the Tacoma bracket. I'll get more pics and update..

 

After the spring was trimmed



Clears the Tacoma bracket



Holes line up



This is the next interference





This nub in the cast makes the Steeda not sit flat/flush into the Tacoma bracket. Grinding it down to the spring should allow it to clear.

 

Don’t worry about the mini truck

 

I want to build a mini next! My first vehicle when I was 16 was a 1998 single cab Tacoma 2wd

 

Lol. Yeah. An 86. My daily..

https://www.tacomaworld.com/threads/xpotrpr-minitruck-1986-toyota-pickup.574446/

 

Ah I missed the signature lol

 

no worries! It's my little pile.. I love it.

 

Ok, I think I'm going to grind the Tacoma bracket instead actually..

 

Here's the bracket after grinding down for clearance.





and the fit

 

How much throw that thing got now?

 

I don't know. That's my next move. I want to see if I need to shave the stop some. Need to bolt it up or hold it somehow to see.

 

Easy fix.