Show off your Bestop Supertops!

that is one super clean super white

 

It's always better to have extra hands, but this can easily be done alone. One small thing that you can do to make it easier is to cut a narrow board or two to help you set the two angle iron frames exactly parallel on top of the bed rails.

 

Damn this thread

 

Mines off for now but here are some older pics.

 

Well there goes another $465.05....bye

 

so i put mine on, and there are lots of areas where water can get in, and the window zippers are so hard to close that i cant get them to close all the way....any suggestions?? maybe i did something wrong

 

The material will start to soften up after a while. I think it just needs some time to break itself in. I dont remember having any issues with my zippers though?

 

i hope i didnt get a faulty one

 

I would hope not. I dunno, maybe just keep trying to mess with it and figure something out.

 

ok so i messed with it some and could get them to close, but not all the way.... there is still like 1 to 1 and a half inches to the top of the zipper but it just wont get there

 

Hmmm..not sure. But like I said, maybe it just needs some time breaking in. Maybe give it a couple days or drive your truck around so you can get all the fabric and stuff to move around, that way it will settle faster. Just a thought.

 

im hoping this works....but that doesnt explain the areas that i can see out of in the corners....its all 4 corners and there are 4 holes that you can see right of

 

i want one!

 

Here's mine.

 

ok, so it rained for the first time on my new bestop..... it leaked some, so my question is how can i waterproof this?

 

I use this http://www.mcnett.com/Seam-Grip-Seam-Sealer-Outdoor-Repair-P133.aspx

 

TT,
I had somewhat of the same problem, but it was cold and the top material wasn't as pliable as it could have been. I had to heat my garage. Since you're in Florida, temperature might not be a factor. What I did was release the bows, as if I was collapsing the top, zip up the window zippers, then re-tension the bows. See page 10, step 25 of the instructions and/or page 11, step 3. Just be careful & don't force anything; I'd hate to see you rip the seams open.

 

I hope it is okay to show off a different brand...

 

Who makes that top? Any other pics of it?

 

Looks like the snug top canvas topper. I was looking at those but I liked having windows.