TRD rims not fitting

Man those would have been beautiful!

 

A machine shop would be able to cut a chamfer into that lip or enlarge that bore enough to make them fit without wobble or issues.

Ted

 

I like the FSW'S on 265/70/17. Looks perfect imo.

https://www.tacomaworld.com/threads/2021-4runner-trd-pro-replica-wheels.695332/page-32#post-26047295

 

Sorry OP, but you really have to use something else to measure it! Use calipers to do it, HF even has some plastic ones that are accurate down to a 1/10th of a mm. That tape measure doesn’t cut it.

It’s a great idea to take it to a machine shop, they can rebore it. They do look good, it’ll be a shame to have to return them.

 

I ordered a caliper, just couldn’t wait a day to ask this question Lol. Can’t return them either, they have weights on them and it’s considered used now.

 

Who did you purchase from?

 

I'm not seeing any issue with the rim. This is a rim -


The rim is part of a wheel.

As mentioned by others, just go to a machine shop and have them machine the center hole to fit your hub. This will insure that you still have hubcentric wheels. It won't be cheap. You will probably be looking at $100 a wheel from a quality shop, but short of you doing a shade tree hack job that is the only way.

 

Seems like a local machine shop could ream the center of the rims pretty easily.

 

These are the ones that I bought, and they do fit.

$280 PTR20-35110-BK Toyota 2010-2024 4runner TRD 17" Matte Black Wheel PTR20-35110-BK

PTR20-35110-BK

 

Nice looking wheels. Id be tempted to buy them off you and bore em' out myself if I weren't so strapped for cash right now.

 

That hub centers the wheel..unless you can have it machined perfectly center, your gonna rely on the lug nuts and it will more than likely have vibration issues

 

Some motivation for you to get these finished op . They’re worth it! Bummer they changed.

 

There is an existing thread with solutions. https://www.tacomaworld.com/threads/problems-with-2021-4runner-trd-pro-wheels-install.715447/

Old style (

$280 PTR2035110BK Toyota 2010-2024 4runner TRD 17" Matte Black Wheel PTR20-35110-BK

PTR2035110BK) 2020 and before 4runner wheels work
New style 2021 and later 4runner wheels have the bore issues you are aware of.

fitments seems to be hit or miss. You can have the bore machined or chamfer the edge of your hub or buy the old style, they fit with no issues.

Edit: Very thin spacers also look like a viable solution

 

would a 1/2 hubcentric wheel spacer work? just wondering since it will space it just a little bit. i maybe wrong.

 

Yup.

https://agpwheels.com/products/17x8-agp-pro-bronze

 

Clean! Looks like mine!

 

I have the same issue with SCS. My F5s fit on both the Tacoma and the 80 but the SR8s only fit the Tacoma. Can machine it or get new wheels.

 

might be cheaper to buy some new brake drums and have the raised boss cut down at a machine shop...

Another thought... check out a ridge reamer. It will possibly cut the rim where you need and do it accurately.

 

Quick and easy job to set up on a Bridgeport table and bore it out...

 

I wish I would have bought black instead of MGM.

Wow, those are a bit cheaper than FSW's.