New members

Hello I'm mcattack my 2014 tacoma xspx driver side headlight has a short. Win light on deam, driver side on high. Win lights on high, driver side on deam. What to do?

 

Welcome to TW there Mcattack ..

 

Can u help

 

Aftermarket headlights?
Are there any wiring modifications to the headlight?

 

No the truck bin hit in the front and rebuild.itgot DRL light but they are disabled

 

So you have a voltage meter?
If so, do you know the basics of how to use it?

 

Welcome to TW

 

I do I think I know how to use it I read the high and low beam in Both of them is got a voltage but I went up to the fuses and I'm get nothing there's nothing in between right

 

The dimmer relay feeds power to the fuses.
On Low, the Hi fuses should not have power.
On Hi, the low fuses should not have power.

 

Correct I agree with you and that's the way it is right now But you meter the wires in the plug and I got voltage on both sides I don't see nothing wrong with the wiring up to the fusers could it be the plug itself

 

I was reading that the DRL lights if they're disconnected would have problems with the headlights is that correct

 

It could be, yes.
You should not show any continuity if you probe the power pins at the connectors.
Pins #2 and #1.

But it sounds like the wires are reversed somewhere?

1. low
2. high
3. Ground

 

Number one is ground right

 

No.

1. low
2. high
3. Ground

 

Sounds like a harness got cut, and wired incorrectly going back together

 

Yeah I think you're Right I think there's a wire crossed From the research I've been doing the number one is ground

 

I'm gonna take a look at that better tomorrow I'm gonna go with what you're saying

 

Is #1 a white/black wire?
Or is it Red/Yellow?

 

Yes I'm both sides are the same