What Have You Done To Your 3rd Gen Today?

AVS low profile window deflectors installed last night. Had to pull off almost all the mounting tape and redo it so it wouldn't be visible after installing... but whatever. They're cheap and look good.

Pic after de-logoing and waxing them to clean up the shipping marks they had.

 

Non-JBL. It's a plug-and-play T-harness that taps into the front speakers and plugs into the high-level inputs of the amp. There are a ton of resources on how to build a T-harness throughout the forum, but I just bought one because I'm lazy: https://www.bestbuy.com/site/pac-lo...toyota-vehicles-multi/6512869.p?skuId=6512869

 

Got the third gen yesterday. Today it got the AC drain mod. First gen got a fresh O2 sensor

 

Do you have a link for install information or a link to a thread

 

I once found a great series of posts showing how to modify the spare tire hoist to fit a 33" tire but I can't find it for the life of me. I purchased some titantium exhaust wrap to protect the spare from the exhaust pipe since I not wanting to have it modified but after thinking more about it, I am a little worried that it will cause corrosion to be very bad once it gets wet. Anyone with more brains than me know if this is a good or bad idea?

 

Spare tire hoist mod here (scroll down in this long post): Hodakaguy's Overland Tacoma Builds - on to new adventures. | Page 5 | Tacoma World

 

THANK YOU! I couldn't find it anywhere!

 

It's funny that you bring it up. I'm about to do that mod too!

 

This is not a big or major "what did I do" so we will see. I had a Pedal commander on my 2020 OR V6 but sold it because i thought I was going to get a KMax tune. Getting the tune bothers me because of the warranty concerns so I just bought and installed a Sprint Booster. Haven't driven it yet so no feedback or comparison to the PC.

 

Following. Would like to know how it works out for ya.

 

Spent the afternoon making new drawer face plates and re-carpeting the bed box that I got from @Northbound_Taco

I ordered a couple 2"x60" HDPE strips to place along the bottom of the platform to prevent the wood from getting wet, since my softopper isn't completely water tight, and I still need to carpet the inside of the drawers.

Before and after

 

Nice, Welcome!

 

What wheels are those, really like them?

 

Was able to remove OEM fogs from the top and install the BD fogs I had on my 5th gen but removed prior to sale because the new buyer didn't need them.

I woke up with a stiff neck and wasn't able to drive to work today, so I decided to try and tackle this.

(I think I need to loosen the screw and reposition the lights so that that bezel is flush with the bumper)

 

This is the way.

 

My taco got its plates today!!! I also installed some truck bed led lights!

 

Added the TRD Pro tails. I disliked the chrome housing on the TRD so much

 

Where did you pick yours up? Im trying to find a reasonably priced set of these

 

Tundra steering rack is in.

https://youtu.be/jiOMFgrtmLw