What Have You Done To Your 2nd Gen Tacoma Today?

$300 is way cheaper than the quotes I was getting so I’d go that route as well! I think I paid around $120 just to have them sand blasted.

 

Yeah they said about $30-$40 per linier foot depending on how long blasting them takes. So I'm hoping that it comes out to less then $300 but I was very happy to hear that. I thought it was going to be like $500+

 

no pics but yesterday, i searched out my clunk, truck needs a couple u-joints, so they are all getting done, chopped the back section of exhaust off, flipped my spare tire over and found out its never been off the truck nubs are still fresh, topped up that air, and ordered a single 17in FJ cruiser steel wheel to match the 17's on my truck so i can get a matching sized spare. got my Desert does it rack installed and my fire extinguisher mounted, up

no pics because I'm lame. and here on my work computer

 

Just built and installed a pair of shackle flips. Was having way too much wobble from the stock brackets. Found my Taco lean culprit.

 

I could use a set of those

 

It's been too cold for me to be spraying but you can either buy fluid film at a local store or order woolwax as I haven't seen it in store. Kellsportproducts.com it's less prone to wash off like fluid film

 

Did the new cv boot thing and new pads and rotors both sides new lug nuts.

 

What did I do? Nothing my truck is 07 with just 100k all original mint paid for so I just drive it. Only thing I do is put fuel in it.

 

looks so clean!

 

how much did that stoptech set up cost you? I'm about to do brakes and I've all the stuff in my cart for the 4runner/Gx470 big bigger brake stuff. but wouldn't mind grabbing a kit and getting it installed

 

New front brakes.

 

Took the topper off as I’m getting a new one tomorrow and I installed some Backup lights. Not wired in yet, but that will come after I install my new front bumper/lightbar and ditch lights. Only want to take the dash apart once for wiring. Just waiting on the mail….

I forgot how sexy my truck is without the topper. But I love my sleeping platform/storage too much to leave it off.

 

Anyone here ever built theyre own retrofit headlights?

 

Installed the Accesorides remote start. Works like a champ!

 

The last few days I've started project Bluer balls. Wrapping the truck in blue satin. Working my way front to back.

 

are you using 3M knifeless tape?

 

Yeah, I wouldn't wrap without it

 

I built a pair, they didn't come out perfect, but they were pretty decent. I have several posts in my build thread from the project starting here: https://www.tacomaworld.com/threads/baddnas-overlanding-rig-build.433073/page-3#post-16734207