What Have You Done To Your 3rd Gen Today?

I’ll have to get these then to keep these trucks twins. What a sweet price!

 

Tried to get the best photos I could with out using iphones night mode.

Harnesses were donated from a buddy whom upgraded to LED headlamps.

Drove around the block and so far it is a very noticeable improvement. Highly recommended to those (like me) need better lighting til I can upgrade to OEM LED headlamps.

 

Yeah, that was my thought process behind it. I work at night also and sometimes the bright white light is absolutely blinding. I like the look of the white but red is way more functional for me.

 

I love my DMM from them and am looking at getting the drivers side version for a auxbeam setup. I have my phone, GMRS mic and go pro mounted on mine.

 

Took it up to the hills for the first time. Really enjoying how easy it is to pack for a day of skiing and fishing!

 

Definitely doing this. Thanks a lot for the link.

 

WOW! Pictures tell the difference.

I initially hated my lights output and replaced my h11 with some Phillips+60. That still wasn't good enough so I moved the+60 to my foglights and did the Phillips German H9 conversion. I cut the tab in the bulb....

Did you buy a H11 to h9 converter?

 

No my buddy hooked me up after he upgraded to LED Headlamps and gave them to me. He got them off this website.

https://runnin4tacos.com/products/bulbzilla

(also didnt cut the bulb at all)

 

It took me a few tries. Not really sure how I got it as I tried the learn button in the opener with the home link but that didn’t work. Then tried the learn button with the original door remote and it worked.

 

I wonder if the door armrest can be done? That’s the side that really gets me on long drives. I think I’m going to have to look into this.

 

Cut a piece to size from some scrap I have laying around and put it under the Clazzio armrest cover. It's super comfy.

 

I agree. My DMM has worked great. I recently received my Auxbeam and am going to use the adapter that Taco Garage has to mount to my DMM. Awesome customer service and support

 

Finally got my Clazzios in and my gator etc roll up on. I did the fuel cap holder too.

 

whoa cowboy - those are for show only

 

Do you have any pictures from the front? I have 1.25 inch spacers

 

Fourteen years on my second gen and two years on my third gen with Canadian winters, never an issue with the lanyard.

 

I did the exact same thing a couple of weeks ago

 

Mine supposedly got delivered yesterday but my mailbox was empty

 

Did my oil change using a Fumoto Valve, Motivx Filter drain, Motivx Filter housing removal tool and funnel. I also installed a Toyota Oem metal filter housing.

The Fumoto Valve and the Motivx filter draining tools sure made it easy to change my oil Without removing the RCI skid plates, plus no mess.

 

Same here!