Nitori's OEM SR Foglight mod!

daveeasa says he doesn't make these...

 

I think one has moved on to flat pasture and the other is way behind in stocking the barn...
You could do without the plug and play by using posi-taps and mini zip ties to the required wires.

 

Well, it might help if I dont mix up the damn numbers and letters. But maybe he has moved on from making them...I sent the correct information and picture, worth 1 more attempt lol.

 

Kyle had a bunch of cargo T switch illumination harnesses made. I’m not sure where they might be sold. I checked caliraised and didn’t see it.

 

Thank you, I found this on Caliraised.. it.looks similar.. but I no electrical expert
https://caliraisedled.com/products/...9k9OyVsNdT8vI6rJycZ_mrF3Yfg1MckMaAotiEALw_wcB

 

That'll work for the added switch illumination ( and added others later)

 

I’ve only done 2 or 3 cargo T’s.

DSIM makes a cargo rock light harness but it’s not cheap.

I would like to do fog lights off the stalk in my ‘05. I’m way behind on my own truck mods. Hence I’m trying hard to avoid new one off efforts.

 

Pruis light stalk works/fits. Or 2000 Tundra

 

That is it. The description and first photo threw me.

 

Ok so this will be like the "D35" intercept

 

I need to do my Tundra as well.

 

Is that both or just the "D35"?

 

Without the ground wire...but a butt crimp & a positap will complete it. Or Dave could sell ya a dual crimp wire with 090 terminals. YOu's have to de-pin the connectors to add that dual wire.

 

Just the D35 ($29.99)...daisy is extra (for more added switches)

 

Did I find it?

 

Yes

 

Now, just need someone to make a C11 intercept/T Harness and this can be a plug and play upgrade for pre-wired rigs.

 

I used the Cali Raised LED switch and the illumination harness. Was able to get my pin in spot 26, and found a good ground right above the control module, it is a nut you take off from the tube frame for the dash. Big chunk of steel.
not behaving as I expected. Maybe you guys could tell me what your taco did.
I have an SR “prewired “.
It seems like the computer thinks the fog light should always be on when the headlights are on.
they turn off when the brights are on or I turn DRL on.
This seems independent of the fog light switch position. It’s dark and cold now, so I haven’t troubleshot yet. Tomorrow , I’m gonna see what happens when I disconnect the switch and just have the harness inserted. And maybe throw an ohmmeter on the switch pins.
The way I envision this working is…
Fog lights off when switch is not engaged, and only on when the switch is engaged.
What did your SR do?

 

Fogs only come on after TAILS/Parking lights are selected. They also turn OFF when high beams are selected.

 

This is normal for fog light equipped vehicle too isnt it?