What Have You Done To Your 3rd Gen Today?

If you need to make a tighter fit on too thin or too flexible plastic, buy some kydex or ABS sheet available on ebay and Amazon in different
thicknesses then clean it with wax/mold release remover, scuff it up and use ShoeGoo to stick to the back. ShoeGoo stays flexable. Will
make for a tighter fit if needed.

 

I have those but was hoping to tap off of them for an additional plug. For the first time, I realized that one of the plugs in there is a USB-C.

 

@MESO Customs packaging is next level! And the hardware tin with the slide out cover? Going to be repurposing that for sure! Fit and finish is great; for such a small product, I definitely admire the attention to detail.

 

Put on 2021 4runner wheels

 

New rims and tires. Vision Nemesis 17x9 -12 offset and Goodyear Ultra-Terrain 285/70R17

 

I changed out to the H9 65w a few months ago. Definitely can see the difference. Haven’t been flashed at yet.

 

Love those wheels, look so much better than black

 

Came out from work a while back & found this...



No one around of course. Truck was a month old!

Got a new panel from paintedoemparts.com, new sensor from Ebay, good as new for less than my $250 deductible....

 

Put the blue sea usb dual port charger in back
there is a good video somewhere in this forum
also bought the wiring kit makes very easy. See
post 253290 a couple of pages back

 

removed the box on the TRD intake tube. Thanks to JaTe for the correct size.
3.25. Hot soapy water to slide it on.

 

Got it!!

 

Put in Tungsram H11 headlight bulbs. Easy to do. Just had to take windshield washer bolts out to better access passenger side. Haven't tried them at night. Hope they help my old eyes.

 

I've been grounded at home with a torn ACL/MCL and some bone fractures to my tibia/femur after a BMX mishap ...

I started my truck today in the 20 degree weather and let it warm up.. I figured I'd unload my bike and helmet and then change the oil..

I got all my stuff together. Truck was warming up.... Then I realized I'm 2.5 quarts of oil shy.

Looks like I'll be changing it next week. I can't drive until then anyhow.

We'll see if switching over to 5k intervals yields less oil consumption.

 

The H9 swap helped my old eyes ... It was a game changer as far as night time driving goes. I couldn't stand the headlight output until I did the H9 conversion

 

Thanks. Was torn between bronze or gunmetal.

 

I added the seat lifts today; received them as a promo. But the holes were 3/8-16 and the bolts M10-1.5! Thankfully I have (a) a thread checker to verify; and (b) some spare 3/8-16 bolts. I do need to run to the parts store to replace the ones I had on hand with some with flanges or get some sturdy washers. So a 10-minute job is going to take a lot longer: diagnosis of the issue first, a trip to the store, and re-doing one set of bolts (I'll use some Loctite when I put them in permanently).
Moral: DDI is way more expensive than free, but there is a reason that you pay for quality.

 

Installed the Z Precision larger cup holder

 

Being -30 Celsius, with wind chill of -43, (-22 Fahrenheit) here yesterday & today, I've brought in my booster pack from back seat into the house, and I bring it out with me when I take the Taco out for a ride.

My Battery is 5 years old now, and I've been pushing my luck. I just hope it's enough to do the job!!!!

 

man I wish I could do some of these mods and installs myself…