What Have You Done To Your 3rd Gen Today?

Installed bed lights!

 

Ordered stage 3 icon lift. Coil overs, ucas, add a leaf, remote reservoir rear shocks....can't wait to see the difference..what to do with the lift I'm removing....install completed yesterday...finally

 

Today’s task was a 65K mile oil change and wash. Although not shown in the picture, I discovered the infamous white paint peel has started. Interestingly enough it’s not in the super common spot on the doors. So far it’s peeling on a few spots around the edge of the hood. Was hoping I might be spared from peeling, but evidently not. Hopefully it doesn’t get bad elsewhere super quick.

Side note- I know everyone has their preference of oil brands, but I have really taken to the Havoline Lifelong found at Walmart. It’s packaged in a plastic bag in a cardboard box…easy to recycle. And it comes in a 6qt capacity, which works out great for the Tacomas. Not bad on pricing either.

 

This is on my wishlist!

 

I like these! Method 304’s and SCS RAY 10’s. I haven’t seen these before!

 

Swapped out the stock reverse bulbs for LEDs. I have a fairly long and dark driveway so hopefully this helps a bit more. If not, I'll look into other options.

Stock


LEDs

 

2 days ago was -18*F and my poor cold taco just barely started. If it had to turn over one more time I don't think it would have. I replaced the oem battery with a Napa Legend AGM,710 cc, 3 year warranty. Today at - 21* , no problem.

 

Attempted to change the oil today. Should be fairly simple. Got the oil drained and got the filter plug out and filter drained. No problems. However, couldn't get the oil filter case off. Whoever did the last change has it so tight I couldn't get it off. So I went to the local dealer website to schedule a fresh change and because of ToyotaCare, it looks like I can get a free change and tire rotation. They'll drain new fresh oil (aarrrggghhh) and I'll ask them not to torque the filter so tight that it won't come loose next time.

 

Summit Bumper is fully prepped and wired, bumper has been cut and refit, all prep work for the bumper is completely finished.

Summit steps are installed, the anodized steel steps currently curing with a fresh cost of hammered black.

My brother flies in tonight, which we’ll be able to do final install of the bumper as well as drilling/ connecting the side bars.

WE’RE ALMOST THERE BOYS

 

does the tint have insulation?

 

Bought some takeoff wheels from a 2nd gen. 16x7 with 30 mm offset…made in BC. Those are slated for next winter after some cleaning. Plan to run studded tires during ski season….

 

Oh good to know. I was going to get red in their rear seat kit but like the idea of what you did with the pod

 

Market place down here on the coast if flooded with take off tires and wheels, I am going to pick up something for next winter, not that we really get winter here

 

where did you get the steps?

 

no need to lock that anymore

 

Got the OTT tune today, and BUDDY.. it’s the best mod I’ve done yet!

Goodbye gear hunting.. Goodbye spongy ball-less throttle.. Goodbye me dreading taking the truck on a road trip.

 

Awesome! Always loved those bumpers

 

Oh man! PDR probably could get most of that out

 

Nice! Looks awesome

 

Love that stance! Good looking truck