What Chainsaw do you run?

Added some new teeth to the 400.

 

Currently :

Stihl: 661 R MTronic, 661R standard carb, 462R standard carb, 461R standard carb, 362 standard carb, 261 standard carb, 193T & 194T

Husky: 395, 576, 350 with ported 346 top end







Sold the 500i last year

 

M Tronic 661R, my guess is 15-20 hours on the saw
That metal didn't seem to damage the chain much after inspection.
Sometimes you get lucky & other times it's a short day if no back-up chains


Box wedge food

 

Looks a bit like the 572





web pic, not my saw

 

We had hurricane Fiona hit September 23 and we were tasked first with siding with power restoration for 21 days straight, then about 8 weeks of danger tree work in residential areas. We had a lot of new saws bought. The 500i cut like a dream but absolutely guzzled fuel. I can say with our large sample size of saws, Stihl had no to a few very minor issues that we fixed ourselves in the field. Husky on the other hand….not so much

 

My saw of choice, MS261.

 

Back out with the old 460 again today.

 

Husky 395xp drinks bar oil! I have been using the Husqvarna bar oil but decided to cheap out on the lowes pro select oil, we shall see how it goes. Also found the last piece I needed for my Alaskan mill in a job site dumpster!

 

I buy the Husky oil by the gallon.
I used to use Stihl bar oil. But it just didn’t want to flow if it was real cold out.
I believe they make a cold climate formula, but my local Stihl dealer doesn’t stock it.

I like Stihl saws.
But the Husky has the longest bar.

I run a Husqvarna 460, 455, and 450
Stihl MS270 and MS180
Along with a Poulan that I use when I get into dirty stuff. Like cutting out stumps and such.

 

20” Echo Timber Wolf and 16” Husqvarna

 

I was buying the husky oil by the gallon at $25 but the pro select was $13.

 

they make heavy, medium and light bar oils.
I’ve found the Stihl bar oil isn’t as stringy as other brands. Not sure if that’s good or bad.

 

For the money, the Timber Wolf is hard to beat.
I’ve run one, I was impressed.
The little 2511t isn’t a slouch either. It’s a wicked little topper saw.

 

Same. Really nice power to weight ratio.

 

The Stihl oil is used was in the orange jug.
The last time I used it (about 5 years ago) it was super stringy in the cold. (30f and below)
It took forever to pour into the saw. Maybe I got a bad batch?

 

That’s the same stuff I have. At those temps it is stringy, just in the summer it is not. I usually use medium in warmer weather and light in anything near freezing and under.

We have the Total brand (5L) at work and it’s red and very very stringy, almost impossible to pour and not have a thin string go on side of saw after pouring.

 

Rural King has 1 gallon of Cam2 bar oil for $8.99 gallon

Farm & Fleet has Mystik bar oil for $8.99 gallon or $15.99 for 2 gallons of Mystik bar oil

 

$25-$31 for 4L up here. An American gallon is 3.78L so basically same capacity.

glad I don’t pay for it at work.

 

Notice any difference in performance with BarkBox?