Is the Fumoto F133N oil drain valve accessable with the Ptr60-35190 TRD skid plate installed?

I just got both over the past week and thought I'd better ask before diving into it.

 

Had a pro skid on my truck and it works fine with the fumoto valve, reach right up thru the hole or over the side of the skid to flip the valve. Ran one for 6 years on the truck! Let me find some pics and I'll post them for ya!

 

I'm running the

$38 F133S with LC-10 S-Series Large Body FUMOTO® Valve with Short Nipple and LC-10 Lever Clip for 12mm-1.25

F133S with the TRD Pro skid plate. No issues at all. In fact, I think the

$40 F133N with LC-10 F-Series Large Body FUMOTO® Valve with Long Nipple and LC-10 Lever Clip for M12-1.25

F133N is the way to go for anybody considering this setup. I typically use mine with a plastic nipple in order to securely attach the drain hose. There's more than enough clearance for the long brass nipple supplied on the N.

 

I have both the

$40 Fumoto F133N with LC-10 F-Series Large Body FUMOTO® Valve with Long Nipple and LC-10 Lever Clip for M12-1.25

Fumoto F133N and the TRD Skid Plate, and the Fumoto doesn't stick out of the access hole. It is actually just a couple of millimeters short of being at the same level as the skid plate.

 

Awesome! Thank you guys...that was the info I needed!

 

Man that's a lot of part number jargon.

All fumoto 133's fit the skid plate. I run the no-nipple and just let 'er freeflow.

 

Man that's a lot of unnecessary condescending tone outta you, Ryan.

 

finally bought one myself. Great info here. Thanks.

 

I use this style,

$72 NO-SPILL OIL DRAIN KIT | Kit Contains: Dust Cap, Oil Plug, & 10" Hose | Compatible with Various Models, Makes, and Manufactures | Select Your Application

https://www.amazon.com/gp/product/B08P813BG8/ , I like having the hose to direct it into a container

 

Do we have to separate you two children?

 

Statute of limitations rule.
Management is not liable for year-old thrown shade.