Seatbelt charm disabling

Any way to do this relatively easy? Anytime I am on the roads my seatbelt is on 100%. However I move wood around wood a lot on my property and constantly in and out of the vehicle and the noise is infuriating.

 

https://www.tacomaworld.com/threads/3rd-gen-seatbelt-chime-silencer.758958/

 

Your dealership can disable the passenger side 100%, and the driver alarm to just the 5 at startup. I am so in the habit of buckling first before starting that I will usually fasten it first, startup, and then unbuckle before putting it in gear on the grouse hunt….

 

Someone reported that unplugging the wiring harness coming out of the latch under the seat silenced the chime permanently.

 

I used an autel scanner to turn mine off.

 

I have a couple if these in my center console. They are great for short, frequent stops between fishing holes

 

I'm in/out of the truck while driving backroads at 10 mph with a camera in hand shooting wildlife so I get it -
Recently I just started buckling the belt with me not in it, seems to work fine for me.

 

Seatbelt extender works too

 

I talked the service dude into turning mine off when I took it in for the first service.

 

I had a master tech disable mine completely even on start up

 

Download the Carista App. Get a cheap Bluetooth OBD device off Amazon and you can make a bunch of changes including the seatbelt chime.