AC 6MT Build Project

They look great. +0 would be closest to stock right?

 

Stock offset on a Sport is +30 mm.

 

That's why the stock wheels had such an anemic look. I knew this going into it. For my purposes the +0 offset on 1"-wider wheels has put the wheels about where I want them. The 17"x8.5" F266s are also available in a -10 offset.

Now I plan to offload the stock city boi wheels onto someone who wants them.

 

I need to do the same. I wonder how many sets of these 17" sport rims have hit the marketplace as take-offs. I'd love to get rid of them, but the sale needs to finance the next (16") set

 

You might get enough to finance one or two, but not the whole set. Probably get $300 to $400 max for the set.

 

Well, that's terrible given what they cost to buy new from Toyota and the fact mine have <200 miles.

 

KTJO grab handle installed:

 

Cali Raised left and right MOLLE console panels installed:

 

Go Rhino 2.0 sport bar installed, accommodating the OEM tonneau.

 

I like those FSW wheels, I didn’t know you could use factory center cap with their new style. Good to know

 

I installed the Pop & Lock yesterday. I checked the pinouts just to be sure, but everything provided in the kit was correct.

 

Installed the 2WD low range harness on Saturday.

 

Completed the AC drain hose mod.

I have it running down along the inboard edge of the frame and back, making it run parallel to the cat for several inches.

It might be wise to change it to run like this:


Rust on Frame with A/C drain mod fix

 

i might have missed it but is this truck stock height or did you add a lift?

 

What is the purpose of these?

 

Stock height.

 

I thought the same thing.

Maybe to protect from scratches?

 

They are MOLLE panels onto which you attach things. On the right side, I have a 2m transceiver and a light.

 

Heritage grille added on 4/9/2023.


Also tidied up some of the 2Lo wiring behind the right side of the dash.

 

CaliRaised Cat Shields added on 5/13/2023. Security bolts not yet installed.

6MT fitment discussed here:
https://www.tacomaworld.com/threads/cali-raised-catalytic-converter-shield-w-6mt.798933/