Will This Work???

Hello I have a 2018 Tacoma TRD 2WD. Im fixing to put 275/55/20 MT tires with 20x10 rims -19 offset. If I put a 2” leveling kit in the front will this make this setup not rub??? Also would you do the 2”front leveling struts or 2” spacers in the front?

 

Normally when people title a thread with "help", they have a broken vehicle. Please edit you thread title.

 

20” wheels, yikes.

 

Compare your OE size to your proposed size on the tire calculator. What's the overall difference?

Lift doesn't add wheel well clearance. In some cases it can make it worse by changing the bottom of the wheel well arc in relation to the tire position.

Tacomas don't have struts, regardless of what catalogs or people say. The front is double wishbone coil-over-shock

The fitment of the wheel and the width of the tire has more to do with clearances than lift. On OE wheels you can run a full 33" dia using a 255 80 17 or 255 85 16 tire on OE suspension with no cutting or rubbing.

 

This, plus 10" wide, and -19 offset with low- pro tires... Double, triple, Yikes...

 

This is what it will look like same truck as mine and same tires and rims with -19 offset

 

Ask them your fitment questions. IE what was done to make that work.

 

Yeah, it could work.

Glad you provided a reference, because this is all I could come up with in my head.

 

Lots of work getting done in that beast

 

easier to pressure wash under there ...

 

As long as you don't ever plan on turning, that should work.

 

Oh man! I spit my coffee out laughing. Reminds me of back when I was about 10 years old and I told my cousin I could swim under water really good but not on top of water. He said "that's called drowning."

 

Easier to cut the cats out of it.

 

it's gonna be dope