1st Gen Lunchtable Thread - General Discussion

it should be absolutely invisible unless you're ripping 4wd on dry pavement. ADD will make that bitch free wheel anyways. The driver side will spin and it might spin the front driveshaft but you shouldn't notice a single thing ab how it drive in 2wd

 

I also has 4.88s installed (same as extra TRD rear axle), so I guess I could take the LDS out and just run the gears and rear locker. It might be a little overgeared for 32s/33s though.. I've been tryin to sell it all but no takers yet.

 

honestly for a trail only rig lunchboxes are fine. They add a little room for slop so the CVs or birfs aren't as loaded while turning at a stop

 

Taking the LSD out will make you require setup cost. It isn't just bolts

 

Being them to me I'll sell them for 10percent commission

 

I'd put one in a garbage vehicle like a 5 lug or maybe something like a trailered rig. But you can't convince me that isn't just prioritizing money over sense in a vehicle you trust to take you to the middle.of nowhere and back.

 

That stuff would sell in your neighborhood fast.

 

i have run a lock rite and a spartan in the front of the crawler totally fine in a 2wd townie and trailer rig

I didn't even blow up the front third which was engraved 2003 by Zuk..it just dropped the pinion bearing which is probably a function of being smacked on the rocks too many times without a solid spacer. Truck has had 35s-38s on it since then and the lil lock rite hasn't committed die yet

 

The PN is so old you can't even find it listed online lmao

 

I'm pretty confident in being able to sell them or I wouldn't offer lol

 

Just the elocker alone would be gone in a day here cause people want the motors

 

I’ve actually heard a lunchbox rear can be good in a full time 4wd set up. I’ve never tried it though.

 

I was asking $1500 for them. Idk if that’s the going rate but it’s just what I came up with.

 

It would be cool in a little buggy or something that I didn't have to take across multiple states to wheel. I wouldn't mind one in something like that at all. I just wouldn't do it for something I need to rely on, I'd rather wheel without a locker.

 

you're gonna die in a fire 12 ppl who don't have experience with lockers are gonna tell you

Sorry to break the news

 

That's not unreasonable... A geared e locker third goes for $500-800 around here and a front is about the same

 

Is it just for the 7.5" case you're talking about? Or just lunchboxes in general?

 

I wouldn't do it, but plenty of people who are willing to compromise would. It's probably fine, diff stuff is expensive, I view it as something I'd rather not play with if I'm not willing to do it right

 

Yea it’s OBO

 

I'll give you $1000 shipped