New England Mod & Meetup Renaissance group

Actually going to pull the tune off. I had it done in CA a dude called it CVC tune. Performance 91 tune for 5.29s and 35s but the truck is going back to mostly stock so it's way to much for the 32s I'm running now

 

what about a replacement? Then you could have the best of both worlds

 

Would that need to be configured for my truck or just swap? Then isn't the Tcm different too? Cuz that's got some programming changes too

 

Really not 100% on it but it would just need a swap. I know for a 2nd gen you can swap or replace. A few that are heavy into tunes have a spare in case they brick theirs.

Have you asked any tuners on here?

 

I haven't. I have a appointment at the local dealer Monday to get it flashed. Just was curious if anyone here at access to techstream and wanted to make a few bucks

 

Ohhh, so you just want the base 04b04 tune? I can do that, I've got techstream

 

Yeah. Just putting it all back to stock. Where are u located?

 

Just north of Salem, MA on the coast (pretty far I take it)

 

3hrs. Which isn't bad. Would u be free this weekend at all?

 

Albany tomorrow then Sunday me and @AllTacosFloat are sticking a bumper on my truck, if he says it's cool stop by then and I'll be sure to bring my laptop and tactrix

 

I'm sure I could squeeze another if you want to plan it.

 

@crashngiggles Not sure if these measurements will help, but from the top where the handle goes in, should be about 56mm to the top of the part that sticks out that holds the thumb screw. Then from the top of that to the center of the thumb screw should be about another 8mm.

 

GMRS or CB, what're you guys using for a radio? Thinking of installing one for wheelin trips

 

You do need a longbed, however...

 

Depends on the group. The best GMRS radio in the world doesn't do a damn thing if the group is using CB. That said most people use GMRS nowadays. Even trucks - half don't have radios, the other half usually aren't on, and the chatter is just truck drivers bitching at each other at merge points.

Id say GMRS but have a CB handheld as a backup just in case.

And up in the north Maine woods, the truckers use CB and MURS. MURS is open and no license needed so if you go up there, you'll want that handheld as well (no, GMRS and MURS do not overlap)

 

This thing is all beef and super easy to transport!

 

Pro eagle who?

 

https://www.tacomaworld.com/threads/cowl-induction-snorkel.525314/

@Brownmatthall , all the tubing is in the add screen at the bottom.