Aliment with TRD black wheels.

So I went to the dealership to get the two recalls fixed, the break light and some other thing. But I asked to have the truck aligned. They said that their discos don’t fit the wheels. How does that work?

 

Well, you might want to try another alignment shop.

A good alignment is based on accurate equipment and a skilled tech who's willing to be a bit fussy with the process.

Doesn't sound like that dealer fills the bill.

 

What size are the tires?

 

The factory size. Just nitro terra grapplers. I have a beach house on Hilton head island. And had to get new tires one day. After a hurricane hit the island I was driving all over the island making sure my neighbors were safe and with the snorkel kit I wasn’t worried about flooding the engine. Plus I used my jet ski to help when needed. But ever since then. I have been blowing thru tires left and right. Mainly the right front wears unevenly on the inside.

 

what is your mileage?
Possibly a worn when bearing

 

60,000 on a 18

I should say I had to change from the 365 used condoms to the nittos. But I am rotating them every 5,000 miles and all the inside tread patterns are worn the same.

 

I imagine you're getting better traction with the Nittos? The former can be slippery.

 

Either you are toe out or excessive negative camber. Excessive negative camber wearing tire should be easy to eyeball from the front, with the top of the tire leaning in towards the engine.

 

Find a shop you trust with good reviews about alignment. Forget about the stealerships.... Only go to them when you absolutely need to.

 

I believe you described negative camber. Excess negative camber could be what's wearing the inside of the tire. I'm sure you just got your words reversed...it happens. Positive camber could wear the outside edge. It's worth noting that the factory spec window for camber is slightly positive(tires tipped out at top).

 

Yes I did. My bad. Fixed.