What Have You Done To Your 3rd Gen Today?

Thanks. I believe that when you select Tacoma and 16" you are only presented with a 0 offset option (I could be wrong though). So to answer your question, the offset is 0...the backspacing is 4.5" because of the extra half-inch lip on the back side of the rim.

 

Wait, is it still decal day?

 

Where did you get the DD inline Plug and Play professional T-connectors?

 

Do the wheels have any offset to them?

 

did you put anything in its place?

 

I'm waiting in vain for the 'perfect tire' because there are so many tradeoffs. What is best on a summer highway is completely different than what works on ice, which won't hold up well to even moderate off-road use. Tread patterns and rubber compounds are better in some conditions than others. And then factor in size and width variations for different conditions. So I pick some compromise (based either on the majority of conditions driven or the most extreme conditions expected) since none of us can afford tires/rims for every occasion.
Whenever I see a new (to me) tire mentioned here I go look up the info on it to add to my list of possibilities when I need to replace. Keep the ideas coming!

 

I'm not the OP, but I think I see a Meso gashole in the background.

 

https://www.tractorsupply.com/tsc/catalog/horse-stall-mats

55$ ish for a 4x6, cut it to shape.

 

That’s exactly what I did. Mine was $45. I used a sharp OLFA razor knife and a straight edge it cut pretty easy.

 

Right here. I have oem Halogen lights, it makes a difference, there is a different one if you have LED or if you have any other configuration other than OEM Halogen.

https://www.diodedynamics.com/plug-and-play-backlight-harness-for-2016-2023-toyota-tacoma-pair.html

 

Must be a different material than some of the other HD mats. I bought a tailgate mat, made by Dee Zee I believe, to line my DB CrossBin. It appeared to be about the same composition as the Toyota OEM bed mat, which everyone knows is heavy AF. I wanted to cut it (the tailgate mat) into sections to perfectly fit the CrossBin compartments. There was no way I was going to be able to cut it with a utility knife. I ended up putting an old blade on my job site table saw and using it to cut the mat. It had some pretty tough core material embedded in the rubber. FWIW.
BTW your mat looks great. Just sayin' DSFDF.

 

I got it from DRT but I think they're no longer making them. The hook was separate.

 

You say you want Grey, AND then you also like black. Why not a wheel that is two tone black/grey? Black Thino has a few two tone models, and I’m sure there are other manufacturers that do as well.

 

Wish I would have seen that Fob case before I ordered a Cav Blue from MESO. The all black was a bit boring but that Topo looks great!

 

Never thought of that- much better than what i did. i got an Alu Cab canopy and I keep a poorly fed mountain lion back there to greet unsuspecting thieves

 

Nah, I didn’t. It always got twisted and annoying so I just took it off completely.

With the meso gasshole it’s unnecessary, until I drop it and it bounces across the gas station anyways lol.

 

Thanks. Yeah the horse stall mat is heavy…it seems like it’s rubber pellets smashed together. I was concerned that it would come apart but over a year later and it’s held up great.

 

Finally got the window sticker laminated.
$6.50 at Office Max.

 

Now hang it on the wall in the garage with the others.

 

Just paid off my tacoma. feels good. now what should i get next?!