Door seals

"RR" is "Rear" in Toyota parts-speak, so yeah, that makes sense.

For others curious about access cab, here are all the part numbers for these:

67895-04010 - Right Rear (Access Cab)
67896-04010 - Left Rear (Access Cab)

67895-04020 - Right Rear (Double Cab)
67896-04020 - Left Rear (Double Cab)

Jeff

 

Just installed mine today. There’s definitely a noticeable difference, especially with my doors being sound deadened.

 

Would someone please measure the weatherstripping? Is it 1¼" wide by ¾" thick? I'd rather pay $15 locally than $40... TIA and I appreciate the mod OP!

 

Do the seals cover the full length of the door open space, @Jetfixr? I picked up a set the other day for my 2015 DC and test fitting them by holding them against the door it looks like they'll end 4-5 inches above the bottom of the door. Did fitting them with the pressure sensitive tape let them cover the entire space from top to bottom?

 

I was at the dealer today and had the chance to double check the fit of those seals on a Gen 3. As expected, they match up exactly like on a Gen 2. The seal stops about 2-1/2 inches before the bottom of the two doors on the Gen 3s, too. All good.

 

seems the access cabs can't have enough door seals. even my 3rd gen has some bad road/wind noise with the updated seals.

 

Did you end up doing the rear door seals by chance?