Extra cab side window latch

I noticed a wind whistling noise from my Extra Cab side window.
The plastic latch had given up after years. (Of non use)
Anyway, Amazon has a set of two Aluminum replacement sections for $9.00.
No need to replace the whole latch.

 

I bought my 1st Gen in 2016, and 1 day after bringing it home, noticed that BOTH of these latches were broken off! So, same as OP here, I found the machined aluminum latches on Amazon and installed immediately; problem solved, and they look great!

 

Definitely recommended upgrade, I installed those several years ago. Installation take a big pair of Channel Locks, some strategic positioning, and a little patience.

 

I just finished this repair and had to drill out the metal replacement part because the rolled pin was too tight. The window latch seems "loose" though I don't know how it was before I bought the truck because both latches were broken. I can't push on the window from the inside and make it de-latch, so I guess that's OK I was just worried if the fit wasn't tight there might be an opportunity for water to enter or the latch might open when driving. Anyone else have a loose feeling latch?

 

Wish I saw this a few months ago, I got the parts from a junkyard. Took me 45 mins just to scrub them clean

 

I actually just replaced mine yesterday with the arms from Amazon. I ordered 2 sets. Caution, one set had a arm that was thinner than the rest. Maybe that is the reason yours is a little loose?
The Quarter window on the opposite side had a good latch, but wouldn’t “lock” in place. That problem was solved by bending the metal bracket back out slightly.

 

I forgot to mention, the original pins have gripping teeth on them. Where the pins in the arm set from Amazon are smooth. I reused the original pins because once you press them in, they aren’t going anywhere!