1st Gen Lunchtable Thread - General Discussion

I tried to hot glue the pivot on my desk monitor arm and it didn't work. MF is cranked tight as can be and still angles the monitor away from me lol

 

Neighbors fence fell into my yard and they have larger dogs. Out of the 3 sides of the fence around my house one side was there first and is "owned" by two different neighbors. Neither really want to cooperate with my landlord.

I'm inclined to go out there with some deck screws and band-aid fix that side just to keep their loud dogs away from me. Did that at my last rental and that fix is still up somehow. Two posts completely rotted out and I just got creative with some 2x4s.

 

JB weld? I dunno.

 

yeah not a bad thought. I tried to slip a paper shim to add friction but it didn't work

I don't recall this arm being very expensive do maybe JB is the way lol

 

Actually I could drill a hole in the arm and use a zip tie to hold it at the right angle

 

World's most expensive dumbbell by weight, courtesy Earnhardt Toyota

 

don't want to use the Dorman grade 8(?) set from the parts house?

 

Did not trust the coating on those

 

but they're gold

 

Also they didn't have the top part for actually getting the stud in, so it'd only be finger tight (if I could even get it in at all)

 

That's what retaining compound is for

 

The blue Loctite is in the red bottle and the red is in the blue bottle. I love it so much

 

Double nut method

 

180C rating nibba

 

Mr Moneybags

 

I always use the double nut method

because 2 nuts are better than 1

 

Fuck you're telling me man! Even with our commercial discount this stuff is almost 30 bucks a fluid oz. Thankfully the green retaining compound only goes on a few select things... most every other bolt in out production gets red tho

 

It's lawlessness when you buy from everybody

 

pain