Ontario BS Thread

I’ll

take it

 

Brother...how many glamor shots has that bumper been in?

Always driver side front quarter portrait at the bend...right THERE! It has a "je ne sais quoi" sheen to it.

I cannot assist you in your dilemma you state above-mentioned...I have a potato cannon

 

Anyone know a good wheel and tire/ suspension place around Guelph? Or a Canadian website with good prices I just want to order the parts and install it myself

 

i see you only have 24 posts, check out Post 1 of the thread, we had updated it to have a bunch of Canadian shops


Made inb Canada page may also be another thing to look into: https://www.tacomaworld.com/threads/made-in-canada.758963/

 

bu overall, what are you planning on doing and with what parts?

 

Well I already picked up some dirtking ucas when I was in Florida for a steel and now I’m just looking for shocks I want around 2-3 inches of lift I can do a cab mount chop and all that stuff to clear them. Ik dirt king recommends fox shocks but I don’t think it matter aslong as my lift is around the 2.5 inches and I was thinking of doing add a leaf for now in the rear and a ubolt flip kit any recommendations?

 

U-bolt kit
https://archivegarage.com/explore-archive/ols/products/stealth-toyota-u-bolt-flip

 

ok, but what's the goal with the truck? are you going to take it to MOAB or something? or are you keeping it in the garage/ snow banks?
2-3inches you can get from anything, performance is what will be different
@Snail81 covered you for the ubolt flip kit.

 

My old second gen was lifted 1 inch and it did just fine but it would be nice to get the extra clearance

 

I Manly use it as a daily and off-road sometimes on mild stuff but my plan for the long run dosent work with ifs so these just have to last me couple years while I figure all that shit out I was looking a
6110s /5160 but I can’t find a good supplier but I’m really open to anything

 

I just wish I got better shocks on my old truck because I just bought some shitty pro comb ones and they didn’t last long but I was in high school and broke so I just ran them blown out for to long

 

I went with the 6112/5160 combo and bought them from Partsengine.ca .

 

How do you like them?

 

https://www.tacomaworld.com/members/norilsk.169435/ Do you still have these? @Norilsk

 

Really a big improvement over stock. Probably twice the size of the stock suspension components.

 

How much lift did you end up with?

 

I just went with 1 inch lift front and back. The fronts are adjustable and will probably give you 2 to 2.5 if you want. In the back I used a 1 inch block but its easy to add more with an Add a leaf or new springs.

 

Fixed that quote up for ya.

 

^Sawzall once, cry once

Also you won't have to buy tires again when you do the solid axle swap.