1st Gen Lunchtable Thread - General Discussion

https://www.instagram.com/reel/Co6Qiy-Aac1/?igshid=YmMyMTA2M2Y=

 

cray cray

I just want to weld a little aluminum ffs lol

 

Rent a machine for a day and knock the job out yourself

 

Should see how much a professional aluminum MIG machine (push/pull) setup costs. We had a fairly low spec miller one at my machine shop job that I used sometimes and it was $15k.

 

Hell, the Miller 350P at my last job alone is about $11k and that doesn't include the spoolgun.

MIG pulse is the shit though.

I could never get used to the push pull Cobramatic setup we had at my first weld job. I mean I used it well, but I think it's because we were welding cast aluminum and that shit sucks even with preheating it.

 

Almost 0 confidence in that test

 

So you're saying I'm better off building a crucible and cast system

 

Valve bucket shims aren’t making it this week.

I could roll the truck out into the driveway and power wash the bay I guess. Clean the cracks and crevices.

Not going to swap to 4.56 because I can’t afford a rear 4.56 to match my truetrac front. I’d want a Harrop elocked 8.4 or OEM elcoker 8” if I did swap.

 

Well, looking for that ground issue.



Also, cleaned and made sure the connections were all good at the wiper motor since it doesn't work.

I hear a sort of relay "click" when I turn on the rear wiper but it doesn't move at all; even if I leave it on and try to get it started by hand.



I'm even pulling the sub and will not be reinstalling it.

 

@Speedytech7 remember the nasty wiring mess I had found in my rig?

Pulled the sub and found the trailer harness; so I guess I have one and just need to find what wire does what.



Which is odd cause the schematic I found used a different wire set when I looked on mud.

 

Sing me a song, you're the piano cat

Sing me a song right now

Cause we're all in the mood for a melody

that goes meow meow, meow meow, meow meow, meowwww

 

Fucking street sweeper has already rolled by like 6 times; how fucking clean you need the streets to be?

 

Rolled by a 7th time.

 

Probably trying to clean up the mess you left in the street

 

that would be an awful job to have for someone with OCD

 

tryna get that power steering fluid off

 

And I'd be all cool about it but this is the one time I've yanked all the rear interior trim and going through shit.

I found a "loose" wire in my bulb socket after going back in there with cleaner but no effects at all and my light is still an issue.

 

thot the same when i was omw to work this morning, there was still a demolished birb on the street after he went over it with the street cleaner. wot do